Adding the compute node to the cluster for NetApp HCI 1.0, 1.1, and 1.2

After you physically replace the node, you must add it back to the VMware ESXi cluster and perform several networking configurations so that you can use all the available functionalities. If you are using versions of NetApp HCI 1.3 and later, you will be able to add the compute node to the cluster by using the NetApp Deployment Engine (NDE) user interface (UI) or NetApp Hybrid Cloud Control (only for NetApp HCI 1.6P1 and later).

About this task

See NetApp Knowledgebase article: 1091586 (login required) or perform the steps described below.