Skip to main content
OnCommand Insight

Violin Flash Memory Array data source

Contributors

The Violin 6000-Series Flash Memory Array (HTTP) data source collects network information for analysis and validation from Violin 6000-series flash memory arrays.

Terminology

Note

This data collector is no longer available starting with OnCommand Insight 7.3.11.

OnCommand Insight acquires the following inventory information from the Violin 6000-Series Flash Memory Array data source. For each asset type acquired by Insight, the most common terminology used for this asset is shown. When viewing or troubleshooting this data source, keep the following terminology in mind:

Vendor/Model Term

Insight Term

Violin Intelligent Memory Module (VIMM)

Disk

Container

Storage

Memory Gateway

Storage Node

LUN

Volume

Initiator, Initiator Group, Target

Volume Map, Volume Mask

Note

These are common terminology mappings only and might not represent every case for this data source.

Requirements

  • You need a read-only user name and password to the storage.

  • Validate access with a web browser using the storage IP address.

Configuration

Field

Description

IP address or FQDN of Violin Memory Array Main Gateway

IP address or fully-qualified domain name of the Violin Memory Array Main Gateway

User Name

User name for the Violin Memory Array Main Gateway

Password

Password for the Violin Memory Array Main Gateway

Advanced configuration

Field

Description

Communication Port

Port used for communication with Violin array

HTTPS Enabled

Select to use HTTPS

Inventory Poll Interval (min)

Interval between inventory polls (default 20 minutes)

Connection timeout (sec)

Connection timeout (default 60 seconds)

Performance Poll Interval (sec)

Interval between performance polls (default 300 seconds)