Skip to main content
OnCommand Insight

Setting up SNMP for notifications

Contributors

Insight can send SNMP notifications on trigger events, such as violations or when data source thresholds are exceeded.

About this task

Follow these basic steps to configure SNMP in Insight:

Steps

  1. Click Admin > Notifications and go to the SNMP section.

  2. Click Actions and select Add trap source.

  3. In the Add SNMP trap recipients dialog box, enter the IP address and Port to which you want SNMP trap messages sent. For Community String, use “public” for SNMP trap messages.

  4. Click Save.