Adding SnapCenter capacity-based licenses using the SnapCenter GUI

If you are using SnapCenter with ONTAP Select or ONTAP Cloud platforms, you must install one or more SnapCenter capacity-based licenses.

Before you begin

Steps

  1. In the left navigation pane, click Settings.
  2. In the Settings page, click Software.
  3. In the License section of the Software page, click Add () to add a license.
  4. In the Add SnapCenter License wizard, select one of the following methods to obtain the license you want to add:
    For this field... Do this...
    Enter your NetApp Support Site (NSS) login credentials to import licenses
    1. Enter your NSS user name.
    2. Enter your NSS password.
    3. Enter your SnapCenter license serial number.
      Note: This is not your storage controller serial number. If you are using a a storage controller-based capacity license, you must enter it on the storage controller. You do not use the SnapCenter GUI to enter controller-based licenses.
    NetApp License File
    1. Browse to the location of the license file, and then select it.
    2. Click Open.
  5. In the Notifications page, enter the capacity threshold at which SnapCenter sends email, EMS, and AutoSupport notifications.
    The default threshold is 90 percent.
  6. To configure the SMTP server for email notifications, click Settings > Global Settings > Notification Server Settings, and then enter the following details:
    For this field... Do this...
    Email preference Choose either Always or Never.
    Provide email settings If you select Always, specify the following:
    • Sender email address
    • Receiver email address
    • Optional: Edit the default Subject line

      The default subject reads as follows: "SnapCenter License Capacity Notification"

  7. If you want to have Event Management System (EMS) messages sent to the storage system syslog or have AutoSupport messages sent to the storage system for failed operations, select the appropriate check boxes.
    Best Practice: Enabling AutoSupport is recommended to help troubleshoot issues you might experience.
  8. Click Next.
  9. Review the summary, and then click Finish.