How 7-Mode commands map to ONTAP commands

You can use the tables provided to find the ONTAP equivalents of 7-Mode commands, with the exception of the options command.

The following tables list the ONTAP equivalents of the 7-Mode options command. Information about understanding these tables is also provided.

Understanding the 7-Mode to clustered Data ONTAP command map

Navigation table

  • G
  • (no entries)
  • J
  • (no entries)
  • X
  • (no entries)
  • Z
  • (no entries)

A

7-Mode command ONTAP command
acpadmin configure system node run -node {nodename|local} acpadmin configure
acpadmin list_all system node run -node {nodename|local} acpadmin list_all
acpadmin stats system node run -node {nodename|local} acpadmin stats
aggr add aggr add

aggr add-disks

storage aggregate add-disks

aggr create aggr create

storage aggregate create

aggr destroy aggr delete

storage aggregate delete

aggr media_scrub system node run -node {nodename|local} aggr media_scrub
aggr offline aggr offline

storage aggregate offline

aggr online aggr online

storage aggregate online

aggr options aggr modify

storage aggregate {show | modify}

aggr rename aggr rename

storage aggregate rename

aggr restrict aggr restrict

storage aggregate restrict

aggr scrub aggr scrub

storage aggregate scrub

aggr show_space aggr show-space

storage aggregate show-space

aggr status aggr show

storage aggregate show

aggr verify system node run -node {nodename|local} aggr verify
autosupport destinations autosupport destinations

system node autosupport destinations

autosupport history autosupport history

system node autosupport history

autosupport manifest autosupport manifest

system node autosupport manifest

autosupport trigger autosupport trigger

system node autosupport trigger

B

7-Mode command ONTAP command
backup status system node run -node {nodename -command backup status
backup terminate

Not supported

bmc

Not supported

bmc reboot

Not supported

bmc status

Not supported

bmc test

Not supported

C

7-Mode command ONTAP command
cdpd show-neighbors system node run -node {nodename|local} -command network device-discovery show
cdpd show-stats system node run -node {nodename|local} -command cdpd show-stats
cdpd zero stats system node run -node {nodename|local} -command cdpd zero-stats
cf disable cf disable
cf enable cf enable
cf forcegiveback Not supported
cf forcetakeover cf forcetakeover
cf giveback cf giveback

storage failover giveback

cf hw_assist cf hwassist status

storage failover hwassist show

cf monitor all cf monitor all

storage failover show -instance

cf partner cf partner

storage failover show -fields partner-name

cf rsrctbl cf rsrctbl

storage failover progress -table show

cf status cf status

storage failover show

cf takeover cf takeover

storage failover takeover

charmap vserver cifs character-mapping
cifs access cifs access

vserver cifs access

cifs branchcache cifs branchcache

vserver cifs branchcache

cifs changefilerpwd cifs changefilerpwd

vserver cifs changefilerpwd

cifs domaininfo

vserver cifs {show instance|domain discovered-servers show -instance}

cifs gpresult

vserver cifs group-policy show-applied

cifs gpupdate

vserver cifs group-policy update

cifs homedir

vserver cifs home-directory

cifs nbalias

vserver cifs { add-netbios-aliases | remove-netbios-aliases | show -display-netbios-aliases }

cifs prefdc

vserver cifs domain preferred-dc

cifs restart vserver cifs start
cifs sessions vserver cifs sessions show
cifs setup

vserver cifs create

cifs shares cifs shares

vserver cifs share

cifs stat statistics show -object cifs
cifs terminate vserver cifs stop
cifs testdc vserver cifs domain discovered-servers
cifs resetdc cifs resetdc

vserver cifs domain discovered-servers reset-servers

clone clear Not supported
clone start volume file clone create
clone stop Not supported
clone status volume file clone show
config clone Not supported
config diff Not supported
config dump Not supported
config restore Not supported
coredump system node coredump

D

7-Mode command ONTAP command
date date

{ system | cluster } date { show | modify }

dcb priority

system node run -node nodename -command dcb priority

dcb priority show

system node run -node nodename -command dcb priority show

dcb show

system node run -node nodename -command dcb show

df df
df [aggr name]

df -aggregate aggregate-name

df [path name]

df -filesys-name path- name

df -A df -A
df -g df -g

df -gigabyte

df -h df -h

df -autosize

df -i df -i
df -k df -k

df -kilobyte

df -L df -L

df -flexcache

df -m df -m

df -megabyte

df -r df -r
df -s df -s
df -S df -S
df -t df -t

df -terabyte

df -V df -V

df -volumes

df -x df -x

df -skip-snapshot-lines

disk assign disk assign

storage disk assign

disk encrypt

system node run -node runnodename -command disk encrypt

disk fail disk fail

storage disk fail

disk maint disk maint {start | abort | status | list }

system node run -node {nodename|local} -command disk maint {start | abort | status | list }

disk remove disk remove

storage disk remove

disk replace disk replace

storage disk replace

disk sanitize

system node run -node nodename -command disk sanitize

disk scrub

storage aggregate scrub

disk show storage disk show
disk simpull

system node run -node nodename -command disk simpull

disk simpush

system node run -node nodename -command disk simpush

disk zero spares storage disk zerospares
disk_fw_update system node image modify
dns info dns show
download system node image update
du [path name] du -vserver vservername -path pathname

volume file show-disk-usage -vserver vserver_name -path pathname

du -h du -vserver vservername -path pathname -h

volume file show-disk-usage -vserver vserver_name -path pathname -h

du -k du -vserver vservername -path pathname -k

volume file show-disk-usage -vserver vserver_name -path pathname -k

du -m du -vserver vservername -path pathname -m

volume file show-disk-usage -vserver vserver_name -path pathname -m

du -r du -vserver vservername -path pathname -r

volume file show-disk-usage -vserver vserver_name -path pathname -r

du -u du -vserver vservername -path pathname -u

volume file show-disk-usage -vserver vserver_name -path pathname -u

dump Not supported

You must initiate the backup by using NDMP as described in tape backup documentation. For dump-to-null functionality, you must set the NDMP environment variable DUMP_TO_NULL.

Data protection using tape backup

E

7-Mode command ONTAP command
echo echo
ems event status ems event status

event status show

ems log dump

event log show -time >time-interval

ems log dump value event log show
environment chassis system node run -node {nodename|local} -command environment chassis
environment status

system node run -nodenodename -command environment status

environment shelf

Not supported

You must use the "storage shelf" command set.

environment shelf_log environment shelf_log

system node run -node {nodename|local} -command environment shelf_log

environment shelf_stats

system node run -node {nodename|local} -command environment shelf_stats

environment shelf_power_status Not supported

You must use the "storage shelf" command set.

environment chassis

system node run -node {nodename|local} -command environment chassis

environment chassis list-sensors

system node run -node {nodename|local} environment sensors show

exportfs vserver export policy [rule]
exportfs -f vserver export-policy cache flush
exportfs -o vserver export-policy rule
exportfs -p vserver export policy rule
exportfs -q vserver export policy [rule]

F

7-Mode command ONTAP command
fcadmin config

system node run -node {nodename|local} -command fcadmin config

fcadmin link_stats

system node run -node {nodename|local} -command fcadmin link_stats

fcadmin fcal_stats

system node run -node {nodename|local} -command fcadmin fcal_stats

fcadmin device_map

system node run -node {nodename|local} -command fcadmin device_map

fcnic Not supported
fcp config network fcp adapter modify
fcp nameserver fcp nameserver show

vserver fcp nameserver show

fcp nodename

vserver fcp nodename

fcp ping

fcp ping-igroup show OR fcp ping-initiator show

vserver fcp ping-igroup show OR vserver fcp ping-initiator show

fcp portname fcp portname show

vserver fcp portname show

fcp show

vserver fcp show

fcp start fcp start

vserver fcp start

fcp stats fcp stats

fcp adapter stats

fcp status

vserver fcp status

fcp stop fcp stop

vserver fcp stop

fcp topology

network fcp topology show OR vserver fcp topology show

fcp wwpn-alias fcp wwpn-alias

vserver fcp wwpn-alias

fcp zone

fcp zone show

network fcp zone show

fcp dump fcp adapter dump

network fcp adapter dump

fcp reset fcp adapter reset

network fcp adapter reset

fcstat link_stats

system node run -node {nodename|local} -command fcstat link_stats

fcstat fcal_stats

system node run -node {nodename|local} -command fcstat fcal_stats

fcstat device_map

system node run -node {nodename|local} -command fcstat device_map

file reservation volume file reservation
filestats Not supported
flexcache volume flexcache
fpolicy fpolicy

vserver fpolicy

fsecurity show

vserver security file-directory show

fsecurity apply vserver security file-directory apply
fsecurity status vserver security file-directory job-show
fsecurity cancel vserver security file-directory job-stop
fsecurity remove-guard vserver security file-directory remove-slag
ftp Not supported

H

7-Mode command ONTAP command
halt

system node halt -node nodename

halt -f

system node halt inhibit -takeover true

halt -d

system node halt -dump true

help ?
Note: You must type the question mark (?) symbol to execute this command in ONTAP.
hostname hostname

system hostname

httpstat Not supported

You must use the statistics command.

I

7-Mode command ONTAP command
if_addr_filter_info system node run -note nodename -command if_addr_filter_info
ifconfig network interface

network {interface | port}

ifconfig -a network interface show

network {interface | port} show

ifconfig alias network interface create
ifconfig down network interface modify -status-admin down
ifconfig flowcontrol network port modify -flowcontrol-admin
ifconfig mediatype network port modify {-duplex-admin | -speed-admin}
ifconfig mtusize network port modify -mtu
ifconfig netmask network interface modify -netmask
ifconfig up network interface modify -status-admin up
ifgrp create

network port ifgrp create

ifgrp add

network port ifgrp add -port

ifgrp delete

network port ifgrp remove-port

ifgrp destroy

network port ifgrp delete

ifgrp favor

system node run -node {nodename|local} -command ifgrp favor

ifgrp nofavor

system node run -node {nodename|local} -command ifgrp nofavor

ifgrp status

system node run -node {nodename|local} -command ifgrp status

ifgrp stat

system node run -node {nodename|local} -command ifstat ifgrp-port

ifgrp show network port ifgrp show
ifinfo

system node run -node {nodename|local} -command ifinfo

ifstat

system node run -node {nodename|local} -command ifstat

igroup add igroup add

lun igroup add

igroup alua

lun igroup modify -alua

igroup bind igroup bind

lun igroup bind

igroup destroy igroup delete

lun igroup delete

igroup create igroup create

lun igroup create

igroup remove igroup remove

lun igroup remove

igroup rename igroup rename

lun igroup rename

igroup set igroup

lun igroup set

igroup show igroup show

lun igroup show

igroup set ostype igroup modify -ostype
igroup unbind igroup unbind

lun igroup unbind

ipsec Not supported
iscsi alias iscsi create

vserver iscsi create OR

iscsi modify

vserver iscsi modify

iscsi connection iscsi connection

vserver iscsi connection

iscsi initiator iscsi initiator

vserver iscsi initiator

iscsi interface iscsi interface

vserver iscsi interface

iscsi isns iscsi isns

vserver iscsi isns

iscsi portal iscsi portal

vserver iscsi portal

iscsi security iscsi security

vserver iscsi security

iscsi session iscsi session

vserver iscsi session

iscsi show iscsi show

vserver iscsi show

iscsi start iscsi start

vserver iscsi start

iscsi stats statistics {start|stop|show} -object object
Note: Available at the advanced privilege level.
iscsi stop iscsi stop

vserver iscsi stop

K

7-Mode command ONTAP command
key_manager system node run -node {nodename|local} -command key_manager
keymgr system node run -node {nodename|local} -command keymgr

For management interface keys, you must use the "security certificates" commands.

L

7-Mode command ONTAP command
license license show

system license show

license add license add

system license add -license-code V2_license_code

license delete license delete

system license delete -package package_name

lock break vserver locks break
Note: Available at the advanced privilege level.
lock break -h host vserver locks break -client-address client-address
lock break -net network vserver locks break -client-address-type ip address type
lock break -o owner vserver locks break -owner-id owner-id
lock break -p protocol vserver locks break -protocol protocol
lock status vserver locks show
lock status -h host vserver locks show -client-address client-address
lock status -o owner vserver locks show -owner-id owner id
lock status -p protocol vserver locks show -protocol protocol
logger logger

system node run -node {nodename|local} -command logger

logout exit
lun clone volume file clone create
lun comment lun comment
lun config_check Not supported
lun create lun create –vserver vserver_name
lun destroy lun delete
lun map lun map –vserver vserver_name
lun maxsize lun maxsize
lun move lun move
lun offline lun modify -state offline
lun online lun modify -state online
lun resize lun resize
lun set lun set
lun setup lun create
lun share Not supported
lun show lun show
lun snap Not supported
lun stats statistics show -object lun*
Note: Available at the advanced privilege level.
lun unmap lun unmap

M

7-Mode command ONTAP command
man man
maxfiles vol modify -max-number-of-files OR

vol -fields files

mt

Not supported

You must use the storage tape command set.

N

7-Mode command ONTAP command
nbtstat

vserver cifs nbtstat

ndmpd {system | server} services ndmp
ndmpcopy

system node run -node {nodename|local} ndmpcopy

ndmpd on ndmpd on

system services ndmpd on

ndmpd off ndmpd off

system services ndmpd off

ndmpd status

{system | vserver} services ndmp status

ndmpd probe

{system | vserver} services ndmp probe

ndmpd kill

{system | vserver} services ndmp kill

ndmpd killall {system | vserver} services ndmp kill-all
ndmpd password

{system | vserver} services ndmp password

ndmpd version

{system | vserver} services ndmp version

ndp

system node run -node {nodename|local} keymgr

netdiag Not supported

You must use the network interface or netstat commands.

netsat system node run node nodename command netstat
network interface failover network interface show -failover
network port vlan modify Not supported
nfs off nfs off

vserver nfs off

nfs on nfs on

vserver nfs on

nfs setup vserver nfs create OR

vserver setup

nfs stat statistics {start | stop | show} -object nfs*
nfs status vserver nfs status
nfs vstorage vserver nfs modify -vstorage
nfsstat statistics show -object nfs*

O

7-Mode command ONTAP command
orouted Not supported

P

7-Mode command ONTAP command
partner Not supported
passwd security login password
perf report -t statistics {start | stop | show} -object perf
ping {host} network ping {-node nodename | -lif lif-name} -destination
ping {count} network ping {-node nodename | -lif lif-name} -count
ping -l interface network ping -lif lif-name
ping -v network ping -node {nodename | -lif lif-name} -verbose
ping -s network ping -node {nodename | -lif lif-name} -show-detail
ping -R network ping -node {nodename | -lif lif-name} -record-route
pktt delete

system node run -node {nodename|local} pktt delete

pktt dump

system node run -node {nodename|local} pktt dump

pktt list

system node run -node {nodename|local} pktt list

pktt pause

system node run -node {nodename|local} pktt pause

pktt start

system node run -node {nodename|local} pktt start

pktt status

system node run -node {nodename|local} pktt status

pktt stop

system node run -node {nodename|local} pktt stop

portset add portset add

lun portset add

portset create portset create

lun portset create

portset delete portset delete

lun portset delete

portset remove portset remove

lun portset remove

portset show portset show

lun portset show

priority hybrid-cache default Not supported
priority hybrid-cache set volume modify -volume volume_name -vserver vserver_name -caching-policy policy_name
priority hybrid-cache show volume show -volume volume_name -vserver vserver_name -fields caching -policy
priv set set -privilege

Q

7-Mode command ONTAP command
qtree create qtree create

volume qtree create

qtree oplocks qtree oplocks

volume qtree oplocks

qtree security qtree security

volume qtree security

qtree status qtree show

volume qtree show

qtree stats qtree statistics

volume qtree statistics

quota allow quota modify -state

volume quota modify -state on

quota disallow quota modify -state

volume quota modify -state off

quota off quota off

volume quota off

quota on quota on

volume quota on

quota report quota report

volume quota report

quota resize quota resize

volume quota resize

quota status quota show

volume quota show

quota logmsg volume quota show -fields logging, logging -interval

R

7-Mode command ONTAP command
radius Not supported
rdate Not supported
rdfile

Not supported

reallocate off reallocate off
reallocate measure reallocate measure
reallocate on reallocate on
reallocate quiesce reallocate quiesce
reallocate restart reallocate restart
reallocate schedule reallocate schedule
reallocate start reallocate start
reallocate status reallocate show
reallocate stop reallocate stop
reboot reboot

system node reboot -node nodename

reboot -d reboot -d

system node reboot -dump true -node nodename

reboot -f reboot -f

reboot -inhibit-takeover true -node nodename

restore

Not supported

You must initiate the restore by using NDMP as described in tape backup documentation.

Data protection using tape backup

restore_backup

system node restore-backup

Note: Available at the advanced privilege level.
revert_to

system node revert-to node nodename -version

rlm

Not supported

route add route add

network route create

route delete route delete

network route delete

route -s route show

network route show

Note: The network routing-groups command family is deprecated in ONTAP 9 and no longer supported beginning with 9.4.

S

7-Mode command ONTAP command
sasadmin adapter_state system node run -node {nodename|local} -command sasadmin adapter_state
sasadmin channels system node run -node {nodename|local} -command sasadmin channels
sasadmin dev_stats system node run -node {nodename|local} -command sasadmin dev_stats
sasadmin expander system node run -node {nodename|local} -command sasadmin expander
sasadmin expander_map system node run -node {nodename|local} -command sasadmin expander_map
sasadmin expander_phy_state system node run -node {nodename|local} -command sasadmin expander_phy_state
sasadmin shelf storage shelf
sasadmin shelf_short storage shelf
sasstat dev_stats system node run -node {nodename|local} -command sasstat dev_stats
sasstat adapter_state system node run -node {nodename|local} -command sasstat adapter_state
sasstat expander system shelf show -port
sasstat expander_map storage shelf show -module
sasstat expander_phy_state system node run -node {nodename|local} sasstat expander_phy_state
sasstat shelf storage shelf
savecore system node coredump save-all
savecore -i system node coredump config show -i
savecore -l system node coredump show
savecore -s system node coredump status
savecore -w Not supported
savecore -k system node coredump delete-all -type unsaved-kernel
sectrace add vserver security trace create
sectrace delete vserver security trace delete
sectrace show vserver security trace filter show
sectrace print-status vserver security trace trace-result show
secureadmin addcert security certificate install
secureadmin disable ssh security login modify
secureadmin disable ssl security ssl modify
secureadmin enable ssl security ssl modify
secureadmin setup security
secureadmin setup ssh security ssh {add|modify}
secureadmin setup ssl security ssl {add|modify}
secureadmin enable ssh security login modify
secureadmin status ssh security login show
secureadmin status ssl security ssl show
setup Not supported
shelfchk security ssh {add|modify}
showfh security ssl {add|modify}
sis config security login modify
sis off security login show
sis on security ssl show
sis revert_to Not supported
sis start showfh

volume file show-filehandle

sis stop sis off

volume efficiency off

smtape sis on

volume efficiency on

snap autodelete sis policy
snap create sis revert_to

volume efficiency revert-to

Note: Available at the advanced privilege level.
snap delete snap delete

volume snapshot delete

snap delta

Not supported

snap list snap show

volume snapshot show

snap reclaimable volume snapshot compute -reclaimable
Note: Available at the advanced privilege level.
snap rename snap rename

volume snapshot rename

snap reserve

volume {modify|show} –fields percent-snapshot-space –volume volume-name

storage aggregate {modify|show} –fields percent-snapshot-space –aggregate aggregate-name

snap restore snap restore

volume snapshot restore

Note: Available at the advanced privilege level.
snap sched volume snapshot policy
snap reclaimable volume snapshot compute-reclaimable
Note: Available at the advanced privilege level.
snapmirror abort snapmirror abort
snapmirror break snapmirror break
snapmirror destinations snapmirror list-destinations
snapmirror initialize snapmirror initialize
snapmirror migrate Not supported
snapmirror off Not supported
snapmirror on Not supported
snapmirror quiesce snapmirror quiesce
snapmirror release snapmirror release
snapmirror resume snapmirror resume
snapmirror resync snapmirror resync
snapmirror status snapmirror show
snapmirror throttle Not supported
snapmirror update snapmirror update
snmp authtrap snmp authtrap
snmp community snmp community
snmp contact snmp contact
snmp init snmp init
snmp location snmp location
snmp traphost snmp traphost
snmp traps event route show -snmp-support true
software delete system node image package delete
software get system node image get
software install system node image update
software list system node image package show
software update system node image update
source Not supported
sp reboot system service-processor reboot-sp
sp setup system service-processor network modify
sp status system service-processor show
sp status -d system node autosupport invoke-splog
sp status -v system node autosupport invoke-splog
sp update system service-processor image update
sp update-status system service-processor image update-progress
statit statistics {start|stop|show} -preset statit
stats statistics {start|stop|show} –object object
Note: Available at the advanced privilege level.
storage aggregate copy Not supported
storage aggregate media_scrub system node run -node nodename -command aggr media_scrub
storage aggregate snapshot Not supported
storage aggregate split Not supported
storage aggregate undestroy Not supported
storage alias storage tape alias set
storage array storage array
storage array modify storage array modify
storage array remove storage array remove
storage array remove-port storage array port remove
storage array show storage array show
storage array show-config storage array config show
storage array show luns Not supported
storage array show-ports storage array port show
storage disable adapter system node run -node {nodename|local} -command storage disable adapter
storage download acp Storage shelf acp firmware update
storage download shelf storage firmware download
Note: Available at the advanced privilege level.
storage enable adapter system node run -node {nodename|local} -command storage enable adapter
storage load balance storage load balance
storage load show storage load show
storage show acp system node run -node {nodename|local} -command storage show acp
storage show adapter system node run -node {nodename|local} -command storage show adapter
storage show bridge storage bridge show
storage show disk storage show disk

storage disk show

storage show expander storage shelf
storage show fabric system node run -node {nodename|local} -command storage show fabric
storage show fault system node run -node nodename -command storage show fault
storage show hub system node run -node {nodename|local} -command storage show hub
storage show initiators system node run -node {nodename|local} -command storage show initiators
storage show mc storage tape show-media-changer
storage show port storage switch
storage show shelf storage shelf
storage show switch storage switch show
storage show tape storage tape show-tape-drive
storage stats tape statistics show -object tape
storage stats tape zero statistics {start|stop|show} -object tape
storage unalias storage tape alias clear
sysconfig Not supported
sysconfig -a system node run -node {nodename|local} -command sysconfig -a
sysconfig -A system node run -node {nodename|local} -command sysconfig -A
sysconfig -ac system controller config show-errors -verbose
sysconfig -c system controllers config-errors show
sysconfig -d system node run -node {nodename|local} -command sysconfig -d
sysconfig -D system controller config pci show-add-on devices
sysconfig -h system node run -node {nodename|local} -command sysconfig -h
sysconfig -m storage tape show-media-changer
syconfig -M system node run -node {nodename|local} -command sysconfig -M
sysconfig -p

Not supported

You must use the following commands as alternatives:

  • Hypervisor information: system node virtual-machine hypervisor show
  • System disks backing stores: system node virtual-machine instance show-system-disks
  • Virtual disks backing information: storage disk show -virtual-machine-disk-info
sysconfig -P system controller config pci show-hierarchy
sysconfig -r

Not supported

To view disk information, you must use the following commands:

  • File system disks: storage aggregate showstatus
  • Spare disks: storage aggregate show-sparedisks
  • Broken disks: storage disk show -broken
  • Disks in the maintenance center: storage disk show -maintenance
sysconfig -t storage tape show
sysconfig -v

system node run -node nodename -command sysconfig -v

sysconfig -V

system node run -node {nodename|local} -command sysconfig -V

sysstat statistics {start|stop|show} -preset systat
Note: Available at the advanced privilege level.
system health alert system health alert
system health autosupport system health autosupport
system health config system health config
system health node-connectivity system health node-connectivity
system health policy system health policy
system health status system health status
system health subsystem show system health subsystem show

T

7-Mode command ONTAP command
timezone timezone
traceroute -m traceroute -m

network traceroute { -node nodename | -lif lif-name } -maxttl integer

traceroute -n traceroute -n

network traceroute -node {nodename| -lif lif-name} -numeric true

traceroute -p traceroute -p

network traceroute { -node nodename | -lif lif-name } –port integer

traceroute -q traceroute -q

network traceroute { -node nodename | -lif lif-name } -nqueries integer

traceroute -s

Not supported

traceroute -v traceroute -v

network traceroute { -node nodename | -lif lif-name } -verbose [ true ]

traceroute -w traceroute -w

network traceroute { -node nodename | -lif lif-name } -waittime integer

U

7-Mode command ONTAP command
ucadmin system node hardware unified-connect
ups Not supported
uptime system node show -fields uptime
useradmin domainuser add security login create
useradmin domainuser delete security login delete
useradmin domainuser list security login show
useradmin domainuser load Not supported

Use "vserver cifs users-and-groups" command set.

useradmin group add security login role create
useradmin group delete security login role delete
useradmin group list security login role show
useradmin group modify security login role modify
useradmin role add security login role create
useradmin role delete security login role delete
useradmin role list security login role show
useradmin role modify security login role modify
useradmin user add security login create
useradmin user delete security login delete
useradmin user list security login show
useradmin user modify security login modify

V

7-Mode command ONTAP command
version -b version -b

OR system image show

version -v version -v

OR system image show

vfiler Not supported
vfiler run vserver
vfiler start vserver start
vfiler stop vserver stop
vfiler status vserver show
vfiler disallow vserver modify -disallowed-protocols
vlan add network port vlan create
vlan create network port vlan create
vlan delete network port vlan delete
vlan modify Not supported
vlan stat

system node run -node nodename -command vlan stat

vmservices

system node run -node {nodename|local} vmservices

volume add Not supported
volume autosize volume autosize
volume clone volume clone
volume clone split volume clone split
volume container volume show -fields aggregate
volume copy Not supported
You must use one of the following methods as described in logical storage documentation:
  • Create a FlexClone volume of the original volume, then move the volume to another aggregate by using the volume move command.
  • Replicate the original volume using SnapMirror, then break the SnapMirror relationship to make a read-write volume copy.

Logical Storage Management Guide

volume create volume create
vol destroy volume destroy
volume file fingerprint Not supported
volume media_scrub Not supported
volume migrate Not supported
vol mirror Not supported
volume move volume move
volume offline volume offline
volume online volume online
volume options volume {show | modify}
volume quota allow Not supported
volume quota disallow Not supported
volume rename volume rename
volume restrict volume restrict
volume scrub Not supported
volume size volume size
volume snapshot delta Not supported
volume snapshot reserve Not supported
Alternative commands include the following:
  • For volumes, use: the "volume show -fields percent-snapshot-space" and "volume modify -volume volumename -percent-snapshot-space percent" commands.
  • For aggregates, use the "storage aggregate show -fields percent-snapshot-space" and "storage aggregate modify -aggregate aggregate name -percent-snapshot-space percent" commands.
volume split Not supported
volume status volume show
volume verify Not supported
volume wafliron Not supported
vscan vserver vscan

vserver cifs adupdate

Not supported

vserver cifs broadcast

Not supported

vserver cifs comment

Not supported

vserver cifs top

Not supported

vserver iscsi ip_tpgroup add

Not supported

vserver iscsi ip_tpgroup create

Not supported

vserver iscsi ip_tpgroup destroy

Not supported

vserver iscsi ip_tpgroup remove

Not supported

vserver iscsi ip_tpgroup show

Not supported

vserver iscsi tpgroup alua set

Not supported

vserver iscsi tpgroup alua show

Not supported

vserver services name-service dns flush

Not supported

W

7-Mode command ONTAP command
wrfile

Not supported

Y

7-Mode command ONTAP command
ypcat Not supported
ypgroup Not supported
ypmatch Not supported
ypwhich Not supported