BMC CLI commands

You can log into the BMC using SSH. The following commands are supported from the BMC command line.

Command Function
system Display a list of all commands.
system console Connect to the system's console. Use ESC + t to exit the session.
system core Dump the system core and reset.
system power cycle Power the system off, then on.
system power off Power the system off.
system power on Power the system on.
system power status Print system power status.
system reset Reset the system.
system fw ver View all firmware versions that the BMC can read.
system fw upgrade Update the BMC firmware.
system log console Dump host console logs.
system log sel Dump system event (SEL) logs.
system fru show [id] Dump all/selected field replaceable unit (FRU) info.