You should be aware of the necessary options that you can set when configuring SNMP.
Location | Enter the location of the SNMP agent. |
Contact | Enter the contact person for the SNMP agent. |
Community name | Enter a single read-only community string for SNMPv1 and SNMPv2. |
Username, engine ID and authentication protocol | Enter a user name, engine ID of the SNMP agent, and authentication type to use with SNMPv3. Note: The default and recommended value for engine ID is local EngineID.
|
Trap | Enable or disable SNMP traps. |
Host | Enter the destination host IP address. |