Mirroring aggregates

You can use System Manager to protect data and provide increased resiliency by mirroring data in real-time, within a single aggregate. Mirroring aggregates removes single points of failure in connecting to disks and array LUNs.

Before you begin

There must be sufficient free disks in the other pool to mirror the aggregate.

About this task

You cannot mirror Flash Pool aggregate when the cache source is storage pools.

Steps

  1. Choose one of the following methods:
    • Click the Storage Tiers tab.
    • Click Hardware and Diagnostics > Aggregates.
  2. Select the aggregate that you want to mirror, and then click Actions > Mirror.
    Note: SyncMirror is not supported on FabricPool.
  3. In the Mirror this aggregate dialog box, click Mirror to initiate the mirroring.