SNMP window

The SNMP window enables you to view the current SNMP settings for your system. You can also change your system's SNMP settings, enable SNMP protocols, and add trap hosts.

Command buttons

Enable/Disable
Enables or disables SNMP.
Edit
Opens the Edit SNMP Settings dialog box, which enables you to specify the SNMP communities for your storage system and enable or disable traps.
Test Trap Host
Sends a test trap to all the configured hosts to check whether the test trap reaches all the hosts and whether the configurations for SNMP are set correctly.
Refresh
Updates the information in the window.

Details

The details area displays the following information about the SNMP server and host traps for your storage system:

SNMP
Displays whether SNMP is enabled or not.
Traps
Displays if SNMP traps are enabled or not.
Location
Displays the address of the SNMP server.
Contact
Displays the contact details for the SNMP server.
Trap host IP Address
Displays the IP addresses of the trap host.
Community Names
Displays the community name of the SNMP server.
Security Names
Displays the security style for the SNMP server.