Factory configuration default values

The factory configures the SAN optimized configuration using values that have been tested and found to be optimal for AFF clusters. Do not modify the performance and space efficiency parameters unless directed by technical support.

Object Default
Cluster management IP address 10.10.10.10/24
User name admin
Password netapp!123
Cluster name aff
Node management (each node) Port: e0m 10.10.10.1 (node 1)10.10.10.2 (node 2)
Onboard UTA2 ports Configured as FC target

Fabric A: 0e, 0g

Fabric B: 0f,0h

storage virtual machine (SVM) Name = AFF_SAN_DEFAULT_SVM

-snapshot-policy none

-ipspace default

-rootvolume-security-style unix

storage virtual machine (SVM) management LIF: 10.10.10.100

storage virtual machine (SVM) management user name: admin

storage virtual machine (SVM) management password: netapp!123

FCP service Created
FC data LIFs on each node

aff_node-0n_0e_A

aff_node-0n_0g_A

aff_node-0n_0f_B

aff_node-0n_0h_B

-data-protocol fcp

Portsets None
Licenses installed Base clusterCIFS

FCP

FlexClone

Insight_Balance

iSCSI

NFS

SnapManagerSuite

SnapMirror

SnapProtectApps

SnapRestore

SnapVault

Disk ownership (all shelves)

Bays 0-11 to node 1

Bays 12-23 to node 2

Root aggregates (first two shelves only)

One root aggregate of 23 disks created on each node with root-data partitioning

One hot spare partition per node name = node_0n_aggr0

Data aggregates (first two shelves only)

One data aggregate of 23 disks created on each node with root-data partitioning

-space-nearly-full-threshold-percent 70

-space-full-threshold-percent 75

One hot spare partition per node name = node_0n_aggr1

Volume properties (all volumes same size as aggregate and thinly provisioned) autosize-mode = off

snapshot-policy = none

fractional-reserve = 0

space-guarantee = none

Volume efficiency policy -policy default

-type scheduled

-schedule daily

-qos-policy best_effort

inline compression on

SNMP community -community-name public

-type ro

options snmp.enable on

Deduplication sis.max_active_ops = 1