Installing the de-stage controller power module when replacing the chassis

Once the replacement chassis is installed into the rack or system cabinet, you must reinstall the de-stage controller power modules into it.

Steps

  1. If you are not already grounded, properly ground yourself.
  2. Align the end of the DCPM module with the chassis opening, and then gently slide it into the chassis until it clicks into place.
    Note: The module and slot are keyed; do not force the module into the opening. If the module does not go in easily, realign the module and slide it into the chassis.
  3. Repeat this step for the remaining DCPM module.