Reassigning disks

Depending on your configuration, you must either verify the reassignment of disks to the new controller module or manually reassign the disks. If the storage system is in an HA pair, the system ID of the new controller module is automatically assigned to the disks when the giveback occurs at the end of the procedure. In a stand-alone system, you must manually reassign the ID to the disks.

About this task

You must use the correct procedure for your configuration:

Controller module redundancy Then use this procedure...
HA pair Verifying the system ID change on an HA system
Two-node MetroCluster configuration Manually reassigning the system ID on systems in a two-node MetroCluster configuration