Moving the NVDIMM battery

To move the NVDIMM battery from the impaired controller module to the replacement controller module, you must perform a specific sequence of steps.

About this task

You can use the following animation or the written steps to move the NVDIMM battery from the impaired controller module to the replacement controller module.



Steps

  1. Locate the NVDIMM battery in the controller module.
  2. Locate the battery plug and squeeze the clip on the face of the battery plug to release the plug from the socket, and then unplug the battery cable from the socket.
  3. Grasp the battery and press the blue locking tab marked PUSH, and then lift the battery out of the holder and controller module.
  4. Move the battery to the replacement controller module.
  5. Align the battery module with the opening for the battery, and then gently push the battery into slot until it locks into place.
    Note: Do not plug the battery cable back into the motherboard until instructed to do so.