Moving the fans

You must move the fans from the impaired controller module to the replacement module when replacing a failed controller module.

Steps

  1. If you are not already grounded, properly ground yourself.
  2. Remove the fan module by pinching the locking tabs on the side of the fan module, and then lifting the fan module straight out of the controller module.


    Fan locking tabs
    Fan module
  3. Move the fan module to the replacement controller module, and then install the fan module by aligning its edges with the opening in the controller module, and then sliding the fan module into the controller module until the locking latches click into place.
  4. Repeat these steps for the remaining fan modules.