Preparing for installation

To install your AFF C190 system, you need to create an account, register the system, and get license keys. You also need to inventory the appropriate number and type of cables for your system and collect specific network information.

Before you begin

You need to have access to the Hardware Universe for information about site requirements as well as additional information on your configured system. You might also want to have access to the Release Notes for your version of ONTAP for more information about this system.

NetApp Hardware Universe

Find the Release Notes for your version of ONTAP 9

You need to provide the following at your site:

Steps

  1. Unpack the contents of all boxes.
  2. Record the system serial number from the controllers.


  3. Set up your account:
    1. Log in to your existing account or create an account.
    2. Register your system.
    3. Get your license keys.
  4. Download and install Config Advisor on your laptop.
  5. Inventory and make a note of the number and types of cables you received.
    The following table identifies the types of cables you might receive. If you receive a cable not listed in the table, see the Hardware Universe to locate the cable and identify its use.

    NetApp Hardware Universe

    Type of cable... Part number and length Connector type For...
    10 GbE cable (order dependent)

    X6566B-05-R6 (112-00297), 0.5m

    X6566B-2-R6 (112-00299), 2m

    Cluster interconnect network

    X6566B-2-R6 (112-00299), 2m

    X6566B-3-R6 (112-00300), 3m

    X6566B-5-R6 (112-00301), 5m

    Data
    Optical network cables (order dependent)

    X6553-R6 (112-00188), 2m

    X6536-R6 (112-00090), 5m

    X6554-R6(112-00189), 15m

    +

    SFP + FC host network
    Cat 6, RJ-45 (order dependant)

    X6585-R6 (112-00291), 3m

    X6562-R6 (112-00196), 5m

    Ethernet host and management network
    Micro-USB console cable Not applicable Console connection during software setup on non-Windows or Mac laptop/console
    Power cables Not applicable Powering up the system
  6. Download and complete the Cluster configuration worksheet.