Release notes
  Link to the Release Notes
  Link to the Release Notes
SolidFire series hardware information
  Links to hardware installation information
  Replacing a failed chassis
    Replacing a failed SolidFire chassis
  Replacing a failed drive
    Replacing drives for SolidFire storage nodes
      Rules for handling drives
      Removing a failed drive from the cluster
      Replacing failed drives from the chassis
      Adding a drive to the cluster
  Replacing a failed power supply unit
    Replacing a failed power supply unit in a SolidFire chassis
  Links to hardware installation information
  Replacing a failed chassis
    Replacing a failed SolidFire chassis
  Replacing a failed drive
    Replacing drives for SolidFire storage nodes
      Rules for handling drives
      Removing a failed drive from the cluster
      Replacing failed drives from the chassis
      Adding a drive to the cluster
  Replacing a failed power supply unit
    Replacing a failed power supply unit in a SolidFire chassis
H410S and H610S hardware information
  Installing H410S and H610S nodes
    Start here: choosing your installation and setup experience
    Installation and setup high-level workflow
    Installation and setup poster
    Installation and setup guide
      Preparing for installation
      Installing the hardware
      Configuring the node
      Creating a new cluster
  Links to H-series hardware maintenance
  Installing H410S and H610S nodes
    Start here: choosing your installation and setup experience
    Installation and setup high-level workflow
    Installation and setup poster
    Installation and setup guide
      Preparing for installation
      Installing the hardware
      Configuring the node
      Creating a new cluster
  Links to H-series hardware maintenance
Setting up storage
  Setting up storage with Element software
    SolidFire storage system
    Setup overview
    Determining which SolidFire components to install
    Setting up an Element storage system
      Configuring a storage node
        Configuring the node using the TUI
        Configuring the node using the node UI
        Node states
      Creating a storage cluster
      Accessing the Element software user interface
      Adding drives to a cluster
      Configuring a Fibre Channel node
        Adding Fibre Channel nodes to a cluster
        Creating a new cluster with Fibre Channel nodes
        Zoning for Fibre Channel nodes
        Creating a volume access group for Fibre Channel clients
    Setting up a management node
      Installing a management node
      Configuring a storage NIC (eth1)
      Enabling SolidFire Active IQ
    Configuring a Fibre Channel node
      Adding Fibre Channel nodes to a cluster
      Creating a new cluster with Fibre Channel nodes
      Zoning for Fibre Channel nodes
      Creating a volume access group for Fibre Channel clients
    Where to find product documentation and other information
  Setting up storage with Element software
    SolidFire storage system
    Setup overview
    Determining which SolidFire components to install
    Setting up an Element storage system
      Configuring a storage node
        Configuring the node using the TUI
        Configuring the node using the node UI
        Node states
      Creating a storage cluster
      Accessing the Element software user interface
      Adding drives to a cluster
      Configuring a Fibre Channel node
        Adding Fibre Channel nodes to a cluster
        Creating a new cluster with Fibre Channel nodes
        Zoning for Fibre Channel nodes
        Creating a volume access group for Fibre Channel clients
    Setting up a management node
      Installing a management node
      Configuring a storage NIC (eth1)
      Enabling SolidFire Active IQ
    Configuring a Fibre Channel node
      Adding Fibre Channel nodes to a cluster
      Creating a new cluster with Fibre Channel nodes
      Zoning for Fibre Channel nodes
      Creating a volume access group for Fibre Channel clients
    Where to find product documentation and other information
Managing storage
  Managing storage with Element software
    About this guide
    SolidFire storage system
      Clusters
      Nodes
        Storage nodes
        Fibre Channel nodes
        Drives
      Management node for Element software
        Management services for SolidFire all-flash storage
        Persistent volumes
      SolidFire Active IQ
      SolidFire software interfaces
      Networking
        Switch configuration for clusters running Element software
        Network port requirements
    System setup
      Setup overview
      Determining which SolidFire components to install
      Setting up an Element storage system
        Configuring a storage node
          Configuring the node using the TUI
          Configuring the node using the node UI
          Node states
        Creating a storage cluster
        Accessing the Element software user interface
        Adding drives to a cluster
        Configuring a Fibre Channel node
          Adding Fibre Channel nodes to a cluster
          Creating a new cluster with Fibre Channel nodes
          Zoning for Fibre Channel nodes
          Creating a volume access group for Fibre Channel clients
      Setting up a management node
        Installing a management node
        Configuring a storage NIC (eth1)
        Enabling SolidFire Active IQ
    Configuring SolidFire system options after deployment
      Changing the Element software default SSL certificate
    Upgrading storage nodes
      Determining the Element version on the management node
      Migrating from management node 10.x to version 11.x
      Using HealthTools to run pre-upgrade health checks
        Checking the installed version of HealthTools
        Checking the installed version of HealthTools on dark sites
        Updating HealthTools
        Checking for upgrade readiness
      Upgrading Element software
        What happens when an upgrade fails
      Upgrading Element software at dark sites
      Upgrading the management node to version 11.3
    Updating management services for Element all-flash storage installations
      Verifying management services version
      Updating management services
      Updating management services for dark sites
    Using basic options in the Element software UI
      Accessing the Element software user interface
      Limiting results by using filters
      Sorting lists
      Viewing API activity
        Interface refresh rate impacted by cluster load
      Icons in the Element interface
      Providing feedback
    System management
      Managing cluster administrator user accounts
        Storage cluster administrator account types
        Cluster Admins details
        Creating a cluster administrator account
        Editing cluster administrator permissions
        Changing passwords for cluster administrator accounts
        Managing LDAP
          Configuring LDAP
          LDAP details
          Disabling LDAP
      Configuring cluster settings
        Setting cluster full threshold
        Enabling and disabling support access
        Enabling and disabling encryption for a cluster
        Encryption at rest
        Managing the Terms of Use banner
          Enabling Terms of Use
          Editing Terms of Use
          Disabling Terms of Use
        Enabling a broadcast client
        Managing SNMP
          SNMP details
          Configuring an SNMP requestor
          Configuring an SNMP USM user
          Configuring SNMP traps
          Viewing managed object data using management information base files
        Managing drives
          Drives details
        Managing nodes
          Adding a node to a cluster
          Node versioning and compatibility
          Cluster capacity in a mixed node environment
          Node states
          Node details
          Viewing individual node details
        Viewing Fibre Channel ports details
        Fibre Channel ports details
        Managing virtual networks
          Virtual networks details
          Adding a virtual network
          Enabling virtual routing and forwarding
          Editing a virtual network
          Editing VRF VLANs
          Deleting a virtual network
    Data management
      Working with user accounts
        Creating an account
        Account details
        Viewing individual account performance details
        Editing an account
        Deleting an account
      Working with volumes
        Quality of Service
          QoS value limits
          QoS performance curve
        QoS policies
          Creating a QoS policy
          QoS policies details
          Editing a QoS policy
          Deleting a QoS policy
        Creating a volume
        Volume details
        Viewing individual volume performance details
        Editing active volumes
        Deleting a volume
        Restoring a deleted volume
        Purging a volume
        Cloning a volume
        Assigning LUNs to Fibre Channel volumes
        Applying a QoS policy to volumes
        Removing the QoS policy association of a volume
      Working with virtual volumes
        Enabling virtual volumes
        Viewing virtual volume details
        Virtual volume details
        Individual virtual volume details
        Deleting a virtual volume
        Storage containers
          Creating a storage container
          Storage container details
          Individual storage container details
          Editing a storage container
          Deleting a storage container
        Protocol endpoints
          Protocol endpoints details
        Bindings
          Bindings details
        Host details
      Working with volume access groups and initiators
        Creating a volume access group
        Volume access group details
        Viewing individual access group details
        Adding volumes to an access group
        Removing volumes from an access group
        Creating an initiator
        Editing an initiator
        Adding a single initiator to a volume access group
        Adding multiple initiators to a volume access group
        Removing initiators from an access group
        Deleting an access group
        Deleting an initiator
    Data protection
      Using volume snapshots for data protection
        Using individual volume snapshots for data protection task
          Creating a volume snapshot
          Editing snapshot retention
          Deleting a snapshot
          Cloning a volume from a snapshot
          Rolling back a volume to a snapshot
          Volume snapshot backup operations
            Backing up a volume snapshot to an Amazon S3 object store
            Backing up a volume snapshot to an OpenStack Swift object store
            Backing up a volume snapshot to a SolidFire cluster
        Using group snapshots for data protection task
          Group snapshot details
          Creating a group snapshot
          Editing group snapshots
          Deleting a group snapshot
          Rolling back volumes to a group snapshot
          Editing members of group snapshot
          Cloning multiple volumes
          Cloning multiple volumes from a group snapshot
        Scheduling a snapshot
          Snapshot schedule details
          Creating a snapshot schedule
          Editing a snapshot schedule
          Copying a snapshot schedule
          Deleting a snapshot schedule
      Performing remote replication between clusters running NetApp Element software
        Planning cluster and volume pairing for real-time replication
        Pairing clusters
          Pairing clusters using MVIP or a pairing key
            Pairing clusters using MVIP
            Pairing clusters using a pairing key
          Validating the cluster pair connection
        Pairing volumes
          Creating a target volume with read/write access
          Pairing volumes using a volume ID or pairing key
            Pairing volumes using a volume ID
            Pairing volumes using a pairing key
          Assigning a replication source and target to paired volumes
        Validating volume replication
        Deleting a volume relationship after replication
        Managing volume relationships
          Pausing replication
          Changing the mode of replication
          Deleting volume pairs
          Deleting a cluster pair
          Cluster pair details
          Volume pair details
            Volume pairing messages
            Volume pairing warnings
      Using SnapMirror replication between Element and ONTAP clusters
        SnapMirror overview
        Enabling SnapMirror on the cluster
        Enabling SnapMirror on the volume
        SnapMirror endpoints
          Creating an endpoint
          SnapMirror endpoint details
          Editing an endpoint
          Deleting an endpoint
        SnapMirror labels
          Adding SnapMirror labels to snapshots
          Adding SnapMirror labels to snapshot schedules
        SnapMirror relationships
          Creating a SnapMirror relationship
          SnapMirror relationship details
          Editing a SnapMirror relationship
          Deleting a SnapMirror relationship
          SnapMirror relationship actions
        Disaster recovery using SnapMirror
          Performing a failover from an Element cluster
          Performing a failback to Element
            SnapMirror failback scenarios
            Performing a failback when source volume still exists
            Performing a failback when source volume no longer exists
          Performing a transfer or one-time migration from ONTAP to Element
      Backing up and restoring volumes
        Backing up a volume to an Amazon S3 object store
        Backing up a volume to an OpenStack Swift object store
        Backing up a volume to a SolidFire storage cluster
        Restoring a volume from backup on an Amazon S3 object store
        Restoring a volume from backup on an OpenStack Swift object store
        Restoring a volume from backup on a SolidFire storage cluster
    System monitoring and troubleshooting
      Viewing information about system events
        Event types
      Viewing status of running tasks
      Viewing system alerts
        Cluster fault codes
      Viewing node performance activity
      Viewing volume performance
        Volume performance details
      Viewing iSCSI sessions
        iSCSI session details
      Viewing Fibre Channel sessions
        Fibre Channel session details
      Troubleshooting drives
        Removing failed drives from the cluster
        Basic MDSS drive troubleshooting
        Adding MDSS drives
        Removing MDSS drives
      Troubleshooting nodes
        Powering down a cluster
      Working with per-node utilities for network troubleshooting
        Per-node network settings details
        Per-node cluster settings details
        Running system tests
        Running system utilities from the per-node UI
      Working with the management node
        Accessing the management node
          Accessing the management node per-node UI
          Accessing the management node REST API UI
            Getting authorization to use REST APIs
        NetApp HCI alert monitoring
        Management node network settings
        Management node cluster settings
        Testing the management node settings
        Running system utilities from the management node
        Enabling remote NetApp Support connections
        Enabling the Active IQ collector service for SolidFire all-flash storage
        Adding and registering additional clusters to the management node
        Configuring a proxy server
        Getting logs from management services
      Understanding cluster fullness levels
        Accessing per-node settings
      Enabling FIPS 140-2 on your cluster
        SSL ciphers
    Where to find product documentation and other information
  Managing storage with the Element Plug-in for vCenter Server
    About this guide
    vCenter Plug-in overview
    Network port requirements
    VMware vSphere prerequisites
    Getting started
      Installing the NetApp Element Plug-in for vCenter Server
      Upgrading the vCenter Plug-in
      Upgrading vCenter Server
      Installing a management node
      Registering the vCenter Plug-in with vCenter
      Modifying vCenter properties for an in-house (dark site) HTTP server
      Upgrading the management node to version 11.3
        Configuring a storage NIC (eth1)
        Persistent volumes
        Updating management services
        Updating management services for dark sites
      Updating the vCenter Plug-in registration for vCSA
      Updating the vCenter plug-in registration for Windows vCenter
      Accessing the plug-in after installation
    How to use the NetApp Element Plug-in for vCenter Server
      NetApp Element Configuration Extension Point
      NetApp Element Management Extension Point
    vCenter Linked Mode
    Using object naming best practices when managing multiple clusters
    Cluster configuration
      Adding a cluster
      Viewing cluster details
        Cluster details
        Individual cluster details
      Editing cluster profiles
      Removing a cluster profile
      Enabling virtual volumes
      Enabling encryption at rest
      Disabling encryption at rest
      Enabling SSH
      Disabling SSH
      Changing the SSH time limit
      Setting protection domain monitoring
      Shutting down a cluster
      Expanding your NetApp HCI
    Management node (mNode) settings
      Configuring management node settings for QoSSIOC
      Editing management node settings for QoSSIOC
      Clearing management node settings for QoSSIOC
      Changing the QoSSIOC service password
    Viewing QoSSIOC events
      QoSSIOC event details
    Plug-in product information
    Reporting
      Reporting overview
      Viewing event logs
        Event log
        Event types
      Alerts
        Alert error codes
      iSCSI sessions
      Running tasks
      Volume performance
    Management
      Datastore management
        Creating a datastore
        Viewing the datastore list
          Datastore details
        Extending a datastore
        Cloning a datastore
        Sharing a datastore
        Performing VAAI UNMAP
        Deleting a datastore
      QoSSIOC automation
        Enabling QoSSIOC automation
        Disabling QoSSIOC integration
      Volume management
        Creating a volume
        Viewing volumes details
          Volume details
          Individual volume details
        Editing a volume
        Cloning a volume
        Volume backup and restore operations
          Volume backup operations
            Backing up a volume to an Amazon S3 object store
            Backing up a volume to an OpenStack Swift object store
            Backing up a volume to a cluster running Element software
          Volume restore operations
            Restoring a volume from backup on an Amazon S3 object store
            Restoring a volume from backup on an OpenStack Swift object store
            Restoring a volume from backup on a cluster running Element software
        Deleting volumes
        Purging volumes
        Restoring deleted volumes
        Adding volumes to an access group
        Removing volumes from an access group
        Applying a QoS policy to multiple volumes
        Changing the QoS policy association of a volume
      User account management
        Creating an account
        Account details
        Editing an account
        Deleting an account
      Volume access groups
        Creating access groups
        Volume access group details
        Editing access groups
        Deleting access groups
      Initiators
        Creating an initiator
        Initiator details
        Editing an initiator
        Deleting initiators
        Adding initiators to a volume access group
      QoS policies
        Creating a QoS policy
        QoS policy details
        Editing a QoS policy
        Deleting a QoS policy
    Data protection
      Volume snapshots
        Creating a volume snapshot
        Volume snapshot details
        Editing snapshots
        Cloning a volume from a snapshot
        Rolling back a volume to a snapshot
        Volume snapshot backup operations
          Backing up a volume snapshot to an Amazon S3 object store
          Backing up a volume snapshot to an OpenStack Swift object store
          Backing up a volume snapshot to a cluster running Element software
        Deleting a snapshot
      Group snapshots
        Creating a group snapshot
        Group snapshot details
        Editing group snapshots
        Cloning volumes from a group snapshot
        Rolling back volumes to a group snapshot
        Deleting a group snapshot
      Snapshot schedules
        Creating a snapshot schedule
        Snapshot schedule details
        Editing a snapshot schedule
        Copying a snapshot schedule
        Deleting a snapshot schedule
      Configuring cluster and volume pairing for real-time remote replication
        Pairing clusters
          Pairing clusters using known credentials
          Pairing clusters with a pairing key
          Validating the cluster pair connection
        Pairing volumes
          Pairing volumes using known credentials
          Creating target volumes and pairing them with local volumes
          Pairing volumes using a pairing key
          Assigning a replication source and target to paired volumes
        Validating volume replication
        Deleting a volume relationship after replication
        Managing volume relationships
          Pausing replication
          Changing the mode of replication
          Deleting volume pairs
          Deleting a cluster pair
          Volume pair details
            Volume pairing messages
            Volume pairing warnings
    Cluster management
      Drives
        Adding available drives to a cluster
        Drive details
        Removing a drive
      Nodes
        NetApp HCI storage nodes
        NetApp HCI compute nodes
        SolidFire Storage nodes
        SolidFire Fibre Channel nodes
        Adding a node to a cluster
        Node details
        Removing nodes from a cluster
        Restarting cluster nodes
        Shutting down cluster nodes
      VLAN management
        Creating a VLAN
        Virtual network details
        Editing a virtual network
        Deleting a virtual network
    Virtual volumes
      Configuring vSphere Virtual Volumes (VVols) functionality
        Registering the NetApp Element VASA Provider
        Creating a VVol datastore
      Viewing virtual volume details
        Virtual volume details
        Individual virtual volume details
      Storage containers
        Creating a storage container
        Viewing storage container details
          Storage container details
          Individual storage container details
        Deleting a storage container
      Protocol endpoints
        Viewing protocol endpoint details
          Protocol endpoint details
          Individual protocol endpoint details
    Unregistering the vCenter Plug-in
    Removing the vCenter Plug-in
    Troubleshooting
      Plug-in registration successful but icons do not appear in web client
      Error registering plug-in using Registration UI
      Error updating plug-in using Registration UI
      Keystore error using Registration UI
      Error message that NetApp extension cannot be upgraded
      Removing plug-in completes successfully but icons remain
      Plug-in cannot be unregistered or removed after admin password change
      Plug-in management tasks fail or volumes are not accessible to ESXi host
      Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
      Delete datastore operation fails
      Cluster pair cannot connect using a pairing key
      Error message for QoSSIOC status
      QoSSIOC service shown as available but is unavailable
      QoSSIOC is enabled for datastore but unavailable
  Managing storage with the Element API
    About the Element software API
      Request object members
      Response object members
      Request endpoints
      API authentication
      Asynchronous methods
      Attributes
    Common objects
      account
      bulkVolumeJob
      binding (virtual volumes)
      certificateDetails
      cluster
      clusterAdmin
      clusterCapacity
      clusterInfo
      clusterPair
      clusterStats
      clusterStructure
      drive
      driveStats
      error
      event
      fault
      fibreChannelPort
      fipsErrorNodeReport
      fipsNodeReport
      fipsReport
      groupSnapshot
      hardwareInfo
      host (virtual volumes)
      initiator
      ldapConfiguration
      loggingServer
      network (bonded interfaces)
      network (all interfaces)
      network (Ethernet interfaces)
      network (local interfaces)
      network (SNMP)
      networkInterface
      node
      nodeStats
      ontapVersionInfo
      pendingActiveNode
      pendingNode
      protectionDomainLevel
      protectionDomainResiliency
      protectionDomainTolerance
      protectionSchemeResiliency
      protectionSchemeTolerance
      protocolEndpoint
      QoS
      QoSPolicy
      remoteClusterSnapshotStatus
      schedule
      session (Fibre Channel)
      session (iSCSI)
      snapMirrorAggregate
      snapMirrorClusterIdentity
      snapMirrorEndpoint
      snapMirrorJobScheduleCronInfo
      snapMirrorLunInfo
      snapMirrorNetworkInterface
      snapMirrorNode
      snapMirrorPolicy
      snapMirrorPolicyRule
      snapMirrorRelationship
      snapMirrorVolume
      snapMirrorVolumeInfo
      snapMirrorVserver
      snapMirrorVserverAggregateInfo
      snapshot
      snmpTrapRecipient
      storageContainer
      syncJob
      task (virtual volumes)
      usmUser
      virtualNetwork
      virtualVolume
      volume
      volumeAccessGroup
      volumePair
      volumeStats
    Common methods
      GetAPI
      GetAsyncResult
      GetCompleteStats
      GetLimits
      GetOrigin
      GetRawStats
      ListAsyncResults
    Account methods
      AddAccount
      GetAccountByID
      GetAccountByName
      GetAccountEfficiency
      ListAccounts
      ModifyAccount
      RemoveAccount
    Administrator API methods
      AddClusterAdmin
      GetCurrentClusterAdmin
      GetLoginBanner
      ListClusterAdmins
      ModifyClusterAdmin
      RemoveClusterAdmin
      SetLoginBanner
    Cluster API methods
      AddNodes
      ClearClusterFaults
      CreateClusterInterfacePreference
      DeleteClusterInterfacePreference
      DisableEncryptionAtRest
      EnableEncryptionAtRest
      EnableFeature
      GetClusterCapacity
      GetClusterFullThreshold
      GetClusterHardwareInfo
      GetClusterInfo
      GetClusterInterfacePreference
      GetClusterMasterNodeID
      GetClusterStats
      GetClusterVersionInfo
      GetFeatureStatus
      GetLoginSessionInfo
      GetNodeHardwareInfo
      GetNodeStats
      ListActiveNodes
      ListAllNodes
      ListClusterFaults
      ListClusterInterfacePreferences
      ListEvents
      ListNodeStats
      ListISCSISessions
      ListServices
      ListPendingNodes
      ListPendingActiveNodes
      ModifyClusterFullThreshold
      ModifyClusterInterfacePreference
      RemoveNodes
      SetLoginSessionInfo
      Shutdown
    Cluster creation API Methods
      CheckProposedCluster
      CreateCluster
      GetBootstrapConfig
    Drive API methods
      AddDrives
      GetDriveHardwareInfo
      GetDriveStats
      ListDrives
      ListDriveStats
      RemoveDrives
      SecureEraseDrives
    Fibre Channel API methods
      GetVolumeAccessGroupLunAssignments
      ListFibreChannelPortInfo
      ListFibreChannelSessions
      ListNodeFibreChannelPortInfo
      ModifyVolumeAccessGroupLunAssignments
    LDAP API methods
      AddLdapClusterAdmin
      EnableLdapAuthentication
      DisableLdapAuthentication
      GetLdapConfiguration
      TestLdapAuthentication
    Node API methods
      CheckProposedNodeAdditions
      CreateClusterSupportBundle
      CreateSupportBundle
      DeleteAllSupportBundles
      DisableSsh
      EnableSsh
      GetClusterConfig
      GetClusterState
      GetConfig
      GetDriveConfig
      GetHardwareConfig
      GetHardwareInfo
      GetIpmiConfig
      GetIpmiInfo
      GetNetworkConfig
      GetNetworkInterface
      GetNodeActiveTlsCiphers
      GetNodeSSLCertificate
      GetNodeSupportedTlsCiphers
      GetPendingOperation
      GetSshInfo
      ListNetworkInterfaces
      ListDriveHardware
      ListTests
      ListUtilities
      RemoveNodeSSLCertificate
      ResetDrives
      ResetNode
      ResetNodeSupplementalTlsCiphers
      RestartNetworking
      RestartServices
      SetClusterConfig
      SetConfig
      SetNetworkConfig
      SetNodeSSLCertificate
      SetNodeSupplementalTlsCiphers
      Shutdown
      TestConnectEnsemble
      TestConnectMvip
      TestConnectSvip
      TestDrives
      TestHardwareConfig
      TestLocateCluster
      TestLocalConnectivity
      TestNetworkConfig
      TestPing
      TestRemoteConnectivity
    Replication API methods
      Cluster pairing order of operations
      Volume pairing order of operations
      Supported modes of replication for paired clusters
      CompleteClusterPairing
      CompleteVolumePairing
      ListClusterPairs
      ListActivePairedVolumes
      ModifyVolumePair
      RemoveClusterPair
      RemoveVolumePair
      StartClusterPairing
      StartVolumePairing
    SnapMirror API methods
      AbortSnapMirrorRelationship
      BreakSnapMirrorRelationship
      BreakSnapMirrorVolume
      CreateSnapMirrorEndpoint
      CreateSnapMirrorEndpointUnmanaged
      CreateSnapMirrorRelationship
      CreateSnapMirrorVolume
      DeleteSnapMirrorEndpoints
      DeleteSnapMirrorRelationships
      GetOntapVersionInfo
      GetSnapMirrorClusterIdentity
      InitializeSnapMirrorRelationship
      ListSnapMirrorAggregates
      ListSnapMirrorEndpoints
      ListSnapMirrorLuns
      ListSnapMirrorNetworkInterfaces
      ListSnapMirrorNodes
      ListSnapMirrorPolicies
      ListSnapMirrorSchedules
      ListSnapMirrorRelationships
      ListSnapMirrorVolumes
      ListSnapMirrorVservers
      ModifySnapMirrorEndpoint
      ModifySnapMirrorEndpoint (unmanaged)
      ModifySnapMirrorRelationship
      UpdateSnapMirrorRelationship
      QuiesceSnapMirrorRelationship
      ResumeSnapMirrorRelationship
      ResyncSnapMirrorRelationship
    System configuration API methods
      DisableClusterSsh
      DisableSnmp
      EnableClusterSsh
      EnableSnmp
      GetClusterSshInfo
      GetClusterStructure
      GetFipsReport
      GetLldpConfig
      GetLldpInfo
      GetNtpInfo
      GetNvramInfo
      GetRemoteLoggingHosts
      GetSnmpACL
      GetSnmpInfo
      GetSnmpState
      GetSnmpTrapInfo
      GetSSLCertificate
      ListProtectionDomainLevels
      RemoveSSLCertificate
      ResetNetworkConfig
      ResetSupplementalTlsCiphers
      SetClusterStructure
      SetLldpConfig
      SetNtpInfo
      SetRemoteLoggingHosts
      SetSnmpACL
      SetSnmpInfo
      SetSnmpTrapInfo
      SetSSLCertificate
      SnmpSendTestTraps
      TestAddressAvailability
    Multitenant networking API methods
      Virtual network naming conventions
      AddVirtualNetwork
      ModifyVirtualNetwork
      ListVirtualNetworks
      RemoveVirtualNetwork
    Volume API methods
      AddInitiatorsToVolumeAccessGroup
      AddVolumesToVolumeAccessGroup
      CancelClone
      CancelGroupClone
      CloneMultipleVolumes
      CloneVolume
      CopyVolume
      CreateQoSPolicy
      CreateVolume
      CreateVolumeAccessGroup
      CreateBackupTarget
      CreateInitiators
      DeleteInitiators
      DeleteQoSPolicy
      DeleteVolume
      DeleteVolumes
      DeleteVolumeAccessGroup
      GetBackupTarget
      GetVolumeStats
      GetDefaultQoS
      GetQoSPolicy
      GetVolumeCount
      GetVolumeAccessGroupEfficiency
      GetVolumeEfficiency
      ListActiveVolumes
      ListBackupTargets
      ListBulkVolumeJobs
      ListDeletedVolumes
      ListInitiators
      ListQoSPolicies
      ListSyncJobs
      ListVolumeQoSHistograms
      ListVolumes
      ListVolumeStats
      ListVolumeAccessGroups
      ListVolumesForAccount
      ListVolumeStatsByAccount
      ListVolumeStatsByVirtualVolume
      ListVolumeStatsByVolume
      ListVolumeStatsByVolumeAccessGroup
      ModifyBackupTarget
      ModifyInitiators
      ModifyQoSPolicy
      ModifyVolume
      ModifyVolumes
      ModifyVolumeAccessGroup
      PurgeDeletedVolume
      PurgeDeletedVolumes
      RemoveBackupTarget
      RemoveInitiatorsFromVolumeAccessGroup
      RemoveVolumesFromVolumeAccessGroup
      RestoreDeletedVolume
      SetDefaultQoS
      StartBulkVolumeRead
      StartBulkVolumeWrite
      UpdateBulkVolumeStatus
    Volume snapshot API methods
      Snapshots overview
      CreateGroupSnapshot
      CreateSchedule
      CreateSnapshot
      DeleteGroupSnapshot
      DeleteSnapshot
      GetSchedule
      ListGroupSnapshots
      ListSchedules
      ListSnapshots
      ModifyGroupSnapshot
      ModifySchedule
      ModifySnapshot
      RollbackToGroupSnapshot
      RollbackToSnapshot
    Virtual volume API methods
      CreateStorageContainer
      DeleteStorageContainers
      GetStorageContainerEfficiency
      GetVirtualVolumeCount
      ListProtocolEndpoints
      ListStorageContainers
      ListVirtualVolumeBindings
      ListVirtualVolumeHosts
      ListVirtualVolumes
      ListVirtualVolumeTasks
      ModifyStorageContainer
    Cluster fault codes
    Access control
    Response examples
      GetConfig
      GetClusterHardwareInfo
      GetLldpInfo
      GetNetworkConfig
      GetNodeHardwareInfo (output for iSCSI)
      GetNodeHardwareInfo (output for Fibre Channel nodes)
      GetNvramInfo
      ListActiveNodes
      ListActiveVolumes
      TestHardwareConfig
    Contacting NetApp Support
  Using the management node
    About this guide
    Management node for Element software
      Management services for SolidFire all-flash storage
      Persistent volumes
    Network port requirements
    Installing a management node
    Upgrading the management node to version 11.3
    Configuring a storage NIC (eth1)
    Recovering a management node
    Working with the management node
      Accessing the management node
        Accessing the management node per-node UI
        Accessing the management node REST API UI
          Getting authorization to use REST APIs
      NetApp HCI alert monitoring
      Management node network settings
      Management node cluster settings
      Testing the management node settings
      Running system utilities from the management node
      Enabling remote NetApp Support connections
      Enabling the Active IQ collector service for SolidFire all-flash storage
      Adding and registering additional clusters to the management node
      Configuring a proxy server
      Getting logs from management services
    Verifying management services version
    Updating management services
    Updating management services for dark sites
  Managing storage with Element software
    About this guide
    SolidFire storage system
      Clusters
      Nodes
        Storage nodes
        Fibre Channel nodes
        Drives
      Management node for Element software
        Management services for SolidFire all-flash storage
        Persistent volumes
      SolidFire Active IQ
      SolidFire software interfaces
      Networking
        Switch configuration for clusters running Element software
        Network port requirements
    System setup
      Setup overview
      Determining which SolidFire components to install
      Setting up an Element storage system
        Configuring a storage node
          Configuring the node using the TUI
          Configuring the node using the node UI
          Node states
        Creating a storage cluster
        Accessing the Element software user interface
        Adding drives to a cluster
        Configuring a Fibre Channel node
          Adding Fibre Channel nodes to a cluster
          Creating a new cluster with Fibre Channel nodes
          Zoning for Fibre Channel nodes
          Creating a volume access group for Fibre Channel clients
      Setting up a management node
        Installing a management node
        Configuring a storage NIC (eth1)
        Enabling SolidFire Active IQ
    Configuring SolidFire system options after deployment
      Changing the Element software default SSL certificate
    Upgrading storage nodes
      Determining the Element version on the management node
      Migrating from management node 10.x to version 11.x
      Using HealthTools to run pre-upgrade health checks
        Checking the installed version of HealthTools
        Checking the installed version of HealthTools on dark sites
        Updating HealthTools
        Checking for upgrade readiness
      Upgrading Element software
        What happens when an upgrade fails
      Upgrading Element software at dark sites
      Upgrading the management node to version 11.3
    Updating management services for Element all-flash storage installations
      Verifying management services version
      Updating management services
      Updating management services for dark sites
    Using basic options in the Element software UI
      Accessing the Element software user interface
      Limiting results by using filters
      Sorting lists
      Viewing API activity
        Interface refresh rate impacted by cluster load
      Icons in the Element interface
      Providing feedback
    System management
      Managing cluster administrator user accounts
        Storage cluster administrator account types
        Cluster Admins details
        Creating a cluster administrator account
        Editing cluster administrator permissions
        Changing passwords for cluster administrator accounts
        Managing LDAP
          Configuring LDAP
          LDAP details
          Disabling LDAP
      Configuring cluster settings
        Setting cluster full threshold
        Enabling and disabling support access
        Enabling and disabling encryption for a cluster
        Encryption at rest
        Managing the Terms of Use banner
          Enabling Terms of Use
          Editing Terms of Use
          Disabling Terms of Use
        Enabling a broadcast client
        Managing SNMP
          SNMP details
          Configuring an SNMP requestor
          Configuring an SNMP USM user
          Configuring SNMP traps
          Viewing managed object data using management information base files
        Managing drives
          Drives details
        Managing nodes
          Adding a node to a cluster
          Node versioning and compatibility
          Cluster capacity in a mixed node environment
          Node states
          Node details
          Viewing individual node details
        Viewing Fibre Channel ports details
        Fibre Channel ports details
        Managing virtual networks
          Virtual networks details
          Adding a virtual network
          Enabling virtual routing and forwarding
          Editing a virtual network
          Editing VRF VLANs
          Deleting a virtual network
    Data management
      Working with user accounts
        Creating an account
        Account details
        Viewing individual account performance details
        Editing an account
        Deleting an account
      Working with volumes
        Quality of Service
          QoS value limits
          QoS performance curve
        QoS policies
          Creating a QoS policy
          QoS policies details
          Editing a QoS policy
          Deleting a QoS policy
        Creating a volume
        Volume details
        Viewing individual volume performance details
        Editing active volumes
        Deleting a volume
        Restoring a deleted volume
        Purging a volume
        Cloning a volume
        Assigning LUNs to Fibre Channel volumes
        Applying a QoS policy to volumes
        Removing the QoS policy association of a volume
      Working with virtual volumes
        Enabling virtual volumes
        Viewing virtual volume details
        Virtual volume details
        Individual virtual volume details
        Deleting a virtual volume
        Storage containers
          Creating a storage container
          Storage container details
          Individual storage container details
          Editing a storage container
          Deleting a storage container
        Protocol endpoints
          Protocol endpoints details
        Bindings
          Bindings details
        Host details
      Working with volume access groups and initiators
        Creating a volume access group
        Volume access group details
        Viewing individual access group details
        Adding volumes to an access group
        Removing volumes from an access group
        Creating an initiator
        Editing an initiator
        Adding a single initiator to a volume access group
        Adding multiple initiators to a volume access group
        Removing initiators from an access group
        Deleting an access group
        Deleting an initiator
    Data protection
      Using volume snapshots for data protection
        Using individual volume snapshots for data protection task
          Creating a volume snapshot
          Editing snapshot retention
          Deleting a snapshot
          Cloning a volume from a snapshot
          Rolling back a volume to a snapshot
          Volume snapshot backup operations
            Backing up a volume snapshot to an Amazon S3 object store
            Backing up a volume snapshot to an OpenStack Swift object store
            Backing up a volume snapshot to a SolidFire cluster
        Using group snapshots for data protection task
          Group snapshot details
          Creating a group snapshot
          Editing group snapshots
          Deleting a group snapshot
          Rolling back volumes to a group snapshot
          Editing members of group snapshot
          Cloning multiple volumes
          Cloning multiple volumes from a group snapshot
        Scheduling a snapshot
          Snapshot schedule details
          Creating a snapshot schedule
          Editing a snapshot schedule
          Copying a snapshot schedule
          Deleting a snapshot schedule
      Performing remote replication between clusters running NetApp Element software
        Planning cluster and volume pairing for real-time replication
        Pairing clusters
          Pairing clusters using MVIP or a pairing key
            Pairing clusters using MVIP
            Pairing clusters using a pairing key
          Validating the cluster pair connection
        Pairing volumes
          Creating a target volume with read/write access
          Pairing volumes using a volume ID or pairing key
            Pairing volumes using a volume ID
            Pairing volumes using a pairing key
          Assigning a replication source and target to paired volumes
        Validating volume replication
        Deleting a volume relationship after replication
        Managing volume relationships
          Pausing replication
          Changing the mode of replication
          Deleting volume pairs
          Deleting a cluster pair
          Cluster pair details
          Volume pair details
            Volume pairing messages
            Volume pairing warnings
      Using SnapMirror replication between Element and ONTAP clusters
        SnapMirror overview
        Enabling SnapMirror on the cluster
        Enabling SnapMirror on the volume
        SnapMirror endpoints
          Creating an endpoint
          SnapMirror endpoint details
          Editing an endpoint
          Deleting an endpoint
        SnapMirror labels
          Adding SnapMirror labels to snapshots
          Adding SnapMirror labels to snapshot schedules
        SnapMirror relationships
          Creating a SnapMirror relationship
          SnapMirror relationship details
          Editing a SnapMirror relationship
          Deleting a SnapMirror relationship
          SnapMirror relationship actions
        Disaster recovery using SnapMirror
          Performing a failover from an Element cluster
          Performing a failback to Element
            SnapMirror failback scenarios
            Performing a failback when source volume still exists
            Performing a failback when source volume no longer exists
          Performing a transfer or one-time migration from ONTAP to Element
      Backing up and restoring volumes
        Backing up a volume to an Amazon S3 object store
        Backing up a volume to an OpenStack Swift object store
        Backing up a volume to a SolidFire storage cluster
        Restoring a volume from backup on an Amazon S3 object store
        Restoring a volume from backup on an OpenStack Swift object store
        Restoring a volume from backup on a SolidFire storage cluster
    System monitoring and troubleshooting
      Viewing information about system events
        Event types
      Viewing status of running tasks
      Viewing system alerts
        Cluster fault codes
      Viewing node performance activity
      Viewing volume performance
        Volume performance details
      Viewing iSCSI sessions
        iSCSI session details
      Viewing Fibre Channel sessions
        Fibre Channel session details
      Troubleshooting drives
        Removing failed drives from the cluster
        Basic MDSS drive troubleshooting
        Adding MDSS drives
        Removing MDSS drives
      Troubleshooting nodes
        Powering down a cluster
      Working with per-node utilities for network troubleshooting
        Per-node network settings details
        Per-node cluster settings details
        Running system tests
        Running system utilities from the per-node UI
      Working with the management node
        Accessing the management node
          Accessing the management node per-node UI
          Accessing the management node REST API UI
            Getting authorization to use REST APIs
        NetApp HCI alert monitoring
        Management node network settings
        Management node cluster settings
        Testing the management node settings
        Running system utilities from the management node
        Enabling remote NetApp Support connections
        Enabling the Active IQ collector service for SolidFire all-flash storage
        Adding and registering additional clusters to the management node
        Configuring a proxy server
        Getting logs from management services
      Understanding cluster fullness levels
        Accessing per-node settings
      Enabling FIPS 140-2 on your cluster
        SSL ciphers
    Where to find product documentation and other information
  Managing storage with the Element Plug-in for vCenter Server
    About this guide
    vCenter Plug-in overview
    Network port requirements
    VMware vSphere prerequisites
    Getting started
      Installing the NetApp Element Plug-in for vCenter Server
      Upgrading the vCenter Plug-in
      Upgrading vCenter Server
      Installing a management node
      Registering the vCenter Plug-in with vCenter
      Modifying vCenter properties for an in-house (dark site) HTTP server
      Upgrading the management node to version 11.3
        Configuring a storage NIC (eth1)
        Persistent volumes
        Updating management services
        Updating management services for dark sites
      Updating the vCenter Plug-in registration for vCSA
      Updating the vCenter plug-in registration for Windows vCenter
      Accessing the plug-in after installation
    How to use the NetApp Element Plug-in for vCenter Server
      NetApp Element Configuration Extension Point
      NetApp Element Management Extension Point
    vCenter Linked Mode
    Using object naming best practices when managing multiple clusters
    Cluster configuration
      Adding a cluster
      Viewing cluster details
        Cluster details
        Individual cluster details
      Editing cluster profiles
      Removing a cluster profile
      Enabling virtual volumes
      Enabling encryption at rest
      Disabling encryption at rest
      Enabling SSH
      Disabling SSH
      Changing the SSH time limit
      Setting protection domain monitoring
      Shutting down a cluster
      Expanding your NetApp HCI
    Management node (mNode) settings
      Configuring management node settings for QoSSIOC
      Editing management node settings for QoSSIOC
      Clearing management node settings for QoSSIOC
      Changing the QoSSIOC service password
    Viewing QoSSIOC events
      QoSSIOC event details
    Plug-in product information
    Reporting
      Reporting overview
      Viewing event logs
        Event log
        Event types
      Alerts
        Alert error codes
      iSCSI sessions
      Running tasks
      Volume performance
    Management
      Datastore management
        Creating a datastore
        Viewing the datastore list
          Datastore details
        Extending a datastore
        Cloning a datastore
        Sharing a datastore
        Performing VAAI UNMAP
        Deleting a datastore
      QoSSIOC automation
        Enabling QoSSIOC automation
        Disabling QoSSIOC integration
      Volume management
        Creating a volume
        Viewing volumes details
          Volume details
          Individual volume details
        Editing a volume
        Cloning a volume
        Volume backup and restore operations
          Volume backup operations
            Backing up a volume to an Amazon S3 object store
            Backing up a volume to an OpenStack Swift object store
            Backing up a volume to a cluster running Element software
          Volume restore operations
            Restoring a volume from backup on an Amazon S3 object store
            Restoring a volume from backup on an OpenStack Swift object store
            Restoring a volume from backup on a cluster running Element software
        Deleting volumes
        Purging volumes
        Restoring deleted volumes
        Adding volumes to an access group
        Removing volumes from an access group
        Applying a QoS policy to multiple volumes
        Changing the QoS policy association of a volume
      User account management
        Creating an account
        Account details
        Editing an account
        Deleting an account
      Volume access groups
        Creating access groups
        Volume access group details
        Editing access groups
        Deleting access groups
      Initiators
        Creating an initiator
        Initiator details
        Editing an initiator
        Deleting initiators
        Adding initiators to a volume access group
      QoS policies
        Creating a QoS policy
        QoS policy details
        Editing a QoS policy
        Deleting a QoS policy
    Data protection
      Volume snapshots
        Creating a volume snapshot
        Volume snapshot details
        Editing snapshots
        Cloning a volume from a snapshot
        Rolling back a volume to a snapshot
        Volume snapshot backup operations
          Backing up a volume snapshot to an Amazon S3 object store
          Backing up a volume snapshot to an OpenStack Swift object store
          Backing up a volume snapshot to a cluster running Element software
        Deleting a snapshot
      Group snapshots
        Creating a group snapshot
        Group snapshot details
        Editing group snapshots
        Cloning volumes from a group snapshot
        Rolling back volumes to a group snapshot
        Deleting a group snapshot
      Snapshot schedules
        Creating a snapshot schedule
        Snapshot schedule details
        Editing a snapshot schedule
        Copying a snapshot schedule
        Deleting a snapshot schedule
      Configuring cluster and volume pairing for real-time remote replication
        Pairing clusters
          Pairing clusters using known credentials
          Pairing clusters with a pairing key
          Validating the cluster pair connection
        Pairing volumes
          Pairing volumes using known credentials
          Creating target volumes and pairing them with local volumes
          Pairing volumes using a pairing key
          Assigning a replication source and target to paired volumes
        Validating volume replication
        Deleting a volume relationship after replication
        Managing volume relationships
          Pausing replication
          Changing the mode of replication
          Deleting volume pairs
          Deleting a cluster pair
          Volume pair details
            Volume pairing messages
            Volume pairing warnings
    Cluster management
      Drives
        Adding available drives to a cluster
        Drive details
        Removing a drive
      Nodes
        NetApp HCI storage nodes
        NetApp HCI compute nodes
        SolidFire Storage nodes
        SolidFire Fibre Channel nodes
        Adding a node to a cluster
        Node details
        Removing nodes from a cluster
        Restarting cluster nodes
        Shutting down cluster nodes
      VLAN management
        Creating a VLAN
        Virtual network details
        Editing a virtual network
        Deleting a virtual network
    Virtual volumes
      Configuring vSphere Virtual Volumes (VVols) functionality
        Registering the NetApp Element VASA Provider
        Creating a VVol datastore
      Viewing virtual volume details
        Virtual volume details
        Individual virtual volume details
      Storage containers
        Creating a storage container
        Viewing storage container details
          Storage container details
          Individual storage container details
        Deleting a storage container
      Protocol endpoints
        Viewing protocol endpoint details
          Protocol endpoint details
          Individual protocol endpoint details
    Unregistering the vCenter Plug-in
    Removing the vCenter Plug-in
    Troubleshooting
      Plug-in registration successful but icons do not appear in web client
      Error registering plug-in using Registration UI
      Error updating plug-in using Registration UI
      Keystore error using Registration UI
      Error message that NetApp extension cannot be upgraded
      Removing plug-in completes successfully but icons remain
      Plug-in cannot be unregistered or removed after admin password change
      Plug-in management tasks fail or volumes are not accessible to ESXi host
      Failure occurs during vCenter Plug-in use on Firefox 59.0.2 browsers
      Delete datastore operation fails
      Cluster pair cannot connect using a pairing key
      Error message for QoSSIOC status
      QoSSIOC service shown as available but is unavailable
      QoSSIOC is enabled for datastore but unavailable
  Managing storage with the Element API
    About the Element software API
      Request object members
      Response object members
      Request endpoints
      API authentication
      Asynchronous methods
      Attributes
    Common objects
      account
      bulkVolumeJob
      binding (virtual volumes)
      certificateDetails
      cluster
      clusterAdmin
      clusterCapacity
      clusterInfo
      clusterPair
      clusterStats
      clusterStructure
      drive
      driveStats
      error
      event
      fault
      fibreChannelPort
      fipsErrorNodeReport
      fipsNodeReport
      fipsReport
      groupSnapshot
      hardwareInfo
      host (virtual volumes)
      initiator
      ldapConfiguration
      loggingServer
      network (bonded interfaces)
      network (all interfaces)
      network (Ethernet interfaces)
      network (local interfaces)
      network (SNMP)
      networkInterface
      node
      nodeStats
      ontapVersionInfo
      pendingActiveNode
      pendingNode
      protectionDomainLevel
      protectionDomainResiliency
      protectionDomainTolerance
      protectionSchemeResiliency
      protectionSchemeTolerance
      protocolEndpoint
      QoS
      QoSPolicy
      remoteClusterSnapshotStatus
      schedule
      session (Fibre Channel)
      session (iSCSI)
      snapMirrorAggregate
      snapMirrorClusterIdentity
      snapMirrorEndpoint
      snapMirrorJobScheduleCronInfo
      snapMirrorLunInfo
      snapMirrorNetworkInterface
      snapMirrorNode
      snapMirrorPolicy
      snapMirrorPolicyRule
      snapMirrorRelationship
      snapMirrorVolume
      snapMirrorVolumeInfo
      snapMirrorVserver
      snapMirrorVserverAggregateInfo
      snapshot
      snmpTrapRecipient
      storageContainer
      syncJob
      task (virtual volumes)
      usmUser
      virtualNetwork
      virtualVolume
      volume
      volumeAccessGroup
      volumePair
      volumeStats
    Common methods
      GetAPI
      GetAsyncResult
      GetCompleteStats
      GetLimits
      GetOrigin
      GetRawStats
      ListAsyncResults
    Account methods
      AddAccount
      GetAccountByID
      GetAccountByName
      GetAccountEfficiency
      ListAccounts
      ModifyAccount
      RemoveAccount
    Administrator API methods
      AddClusterAdmin
      GetCurrentClusterAdmin
      GetLoginBanner
      ListClusterAdmins
      ModifyClusterAdmin
      RemoveClusterAdmin
      SetLoginBanner
    Cluster API methods
      AddNodes
      ClearClusterFaults
      CreateClusterInterfacePreference
      DeleteClusterInterfacePreference
      DisableEncryptionAtRest
      EnableEncryptionAtRest
      EnableFeature
      GetClusterCapacity
      GetClusterFullThreshold
      GetClusterHardwareInfo
      GetClusterInfo
      GetClusterInterfacePreference
      GetClusterMasterNodeID
      GetClusterStats
      GetClusterVersionInfo
      GetFeatureStatus
      GetLoginSessionInfo
      GetNodeHardwareInfo
      GetNodeStats
      ListActiveNodes
      ListAllNodes
      ListClusterFaults
      ListClusterInterfacePreferences
      ListEvents
      ListNodeStats
      ListISCSISessions
      ListServices
      ListPendingNodes
      ListPendingActiveNodes
      ModifyClusterFullThreshold
      ModifyClusterInterfacePreference
      RemoveNodes
      SetLoginSessionInfo
      Shutdown
    Cluster creation API Methods
      CheckProposedCluster
      CreateCluster
      GetBootstrapConfig
    Drive API methods
      AddDrives
      GetDriveHardwareInfo
      GetDriveStats
      ListDrives
      ListDriveStats
      RemoveDrives
      SecureEraseDrives
    Fibre Channel API methods
      GetVolumeAccessGroupLunAssignments
      ListFibreChannelPortInfo
      ListFibreChannelSessions
      ListNodeFibreChannelPortInfo
      ModifyVolumeAccessGroupLunAssignments
    LDAP API methods
      AddLdapClusterAdmin
      EnableLdapAuthentication
      DisableLdapAuthentication
      GetLdapConfiguration
      TestLdapAuthentication
    Node API methods
      CheckProposedNodeAdditions
      CreateClusterSupportBundle
      CreateSupportBundle
      DeleteAllSupportBundles
      DisableSsh
      EnableSsh
      GetClusterConfig
      GetClusterState
      GetConfig
      GetDriveConfig
      GetHardwareConfig
      GetHardwareInfo
      GetIpmiConfig
      GetIpmiInfo
      GetNetworkConfig
      GetNetworkInterface
      GetNodeActiveTlsCiphers
      GetNodeSSLCertificate
      GetNodeSupportedTlsCiphers
      GetPendingOperation
      GetSshInfo
      ListNetworkInterfaces
      ListDriveHardware
      ListTests
      ListUtilities
      RemoveNodeSSLCertificate
      ResetDrives
      ResetNode
      ResetNodeSupplementalTlsCiphers
      RestartNetworking
      RestartServices
      SetClusterConfig
      SetConfig
      SetNetworkConfig
      SetNodeSSLCertificate
      SetNodeSupplementalTlsCiphers
      Shutdown
      TestConnectEnsemble
      TestConnectMvip
      TestConnectSvip
      TestDrives
      TestHardwareConfig
      TestLocateCluster
      TestLocalConnectivity
      TestNetworkConfig
      TestPing
      TestRemoteConnectivity
    Replication API methods
      Cluster pairing order of operations
      Volume pairing order of operations
      Supported modes of replication for paired clusters
      CompleteClusterPairing
      CompleteVolumePairing
      ListClusterPairs
      ListActivePairedVolumes
      ModifyVolumePair
      RemoveClusterPair
      RemoveVolumePair
      StartClusterPairing
      StartVolumePairing
    SnapMirror API methods
      AbortSnapMirrorRelationship
      BreakSnapMirrorRelationship
      BreakSnapMirrorVolume
      CreateSnapMirrorEndpoint
      CreateSnapMirrorEndpointUnmanaged
      CreateSnapMirrorRelationship
      CreateSnapMirrorVolume
      DeleteSnapMirrorEndpoints
      DeleteSnapMirrorRelationships
      GetOntapVersionInfo
      GetSnapMirrorClusterIdentity
      InitializeSnapMirrorRelationship
      ListSnapMirrorAggregates
      ListSnapMirrorEndpoints
      ListSnapMirrorLuns
      ListSnapMirrorNetworkInterfaces
      ListSnapMirrorNodes
      ListSnapMirrorPolicies
      ListSnapMirrorSchedules
      ListSnapMirrorRelationships
      ListSnapMirrorVolumes
      ListSnapMirrorVservers
      ModifySnapMirrorEndpoint
      ModifySnapMirrorEndpoint (unmanaged)
      ModifySnapMirrorRelationship
      UpdateSnapMirrorRelationship
      QuiesceSnapMirrorRelationship
      ResumeSnapMirrorRelationship
      ResyncSnapMirrorRelationship
    System configuration API methods
      DisableClusterSsh
      DisableSnmp
      EnableClusterSsh
      EnableSnmp
      GetClusterSshInfo
      GetClusterStructure
      GetFipsReport
      GetLldpConfig
      GetLldpInfo
      GetNtpInfo
      GetNvramInfo
      GetRemoteLoggingHosts
      GetSnmpACL
      GetSnmpInfo
      GetSnmpState
      GetSnmpTrapInfo
      GetSSLCertificate
      ListProtectionDomainLevels
      RemoveSSLCertificate
      ResetNetworkConfig
      ResetSupplementalTlsCiphers
      SetClusterStructure
      SetLldpConfig
      SetNtpInfo
      SetRemoteLoggingHosts
      SetSnmpACL
      SetSnmpInfo
      SetSnmpTrapInfo
      SetSSLCertificate
      SnmpSendTestTraps
      TestAddressAvailability
    Multitenant networking API methods
      Virtual network naming conventions
      AddVirtualNetwork
      ModifyVirtualNetwork
      ListVirtualNetworks
      RemoveVirtualNetwork
    Volume API methods
      AddInitiatorsToVolumeAccessGroup
      AddVolumesToVolumeAccessGroup
      CancelClone
      CancelGroupClone
      CloneMultipleVolumes
      CloneVolume
      CopyVolume
      CreateQoSPolicy
      CreateVolume
      CreateVolumeAccessGroup
      CreateBackupTarget
      CreateInitiators
      DeleteInitiators
      DeleteQoSPolicy
      DeleteVolume
      DeleteVolumes
      DeleteVolumeAccessGroup
      GetBackupTarget
      GetVolumeStats
      GetDefaultQoS
      GetQoSPolicy
      GetVolumeCount
      GetVolumeAccessGroupEfficiency
      GetVolumeEfficiency
      ListActiveVolumes
      ListBackupTargets
      ListBulkVolumeJobs
      ListDeletedVolumes
      ListInitiators
      ListQoSPolicies
      ListSyncJobs
      ListVolumeQoSHistograms
      ListVolumes
      ListVolumeStats
      ListVolumeAccessGroups
      ListVolumesForAccount
      ListVolumeStatsByAccount
      ListVolumeStatsByVirtualVolume
      ListVolumeStatsByVolume
      ListVolumeStatsByVolumeAccessGroup
      ModifyBackupTarget
      ModifyInitiators
      ModifyQoSPolicy
      ModifyVolume
      ModifyVolumes
      ModifyVolumeAccessGroup
      PurgeDeletedVolume
      PurgeDeletedVolumes
      RemoveBackupTarget
      RemoveInitiatorsFromVolumeAccessGroup
      RemoveVolumesFromVolumeAccessGroup
      RestoreDeletedVolume
      SetDefaultQoS
      StartBulkVolumeRead
      StartBulkVolumeWrite
      UpdateBulkVolumeStatus
    Volume snapshot API methods
      Snapshots overview
      CreateGroupSnapshot
      CreateSchedule
      CreateSnapshot
      DeleteGroupSnapshot
      DeleteSnapshot
      GetSchedule
      ListGroupSnapshots
      ListSchedules
      ListSnapshots
      ModifyGroupSnapshot
      ModifySchedule
      ModifySnapshot
      RollbackToGroupSnapshot
      RollbackToSnapshot
    Virtual volume API methods
      CreateStorageContainer
      DeleteStorageContainers
      GetStorageContainerEfficiency
      GetVirtualVolumeCount
      ListProtocolEndpoints
      ListStorageContainers
      ListVirtualVolumeBindings
      ListVirtualVolumeHosts
      ListVirtualVolumes
      ListVirtualVolumeTasks
      ModifyStorageContainer
    Cluster fault codes
    Access control
    Response examples
      GetConfig
      GetClusterHardwareInfo
      GetLldpInfo
      GetNetworkConfig
      GetNodeHardwareInfo (output for iSCSI)
      GetNodeHardwareInfo (output for Fibre Channel nodes)
      GetNvramInfo
      ListActiveNodes
      ListActiveVolumes
      TestHardwareConfig
    Contacting NetApp Support
  Using the management node
    About this guide
    Management node for Element software
      Management services for SolidFire all-flash storage
      Persistent volumes
    Network port requirements
    Installing a management node
    Upgrading the management node to version 11.3
    Configuring a storage NIC (eth1)
    Recovering a management node
    Working with the management node
      Accessing the management node
        Accessing the management node per-node UI
        Accessing the management node REST API UI
          Getting authorization to use REST APIs
      NetApp HCI alert monitoring
      Management node network settings
      Management node cluster settings
      Testing the management node settings
      Running system utilities from the management node
      Enabling remote NetApp Support connections
      Enabling the Active IQ collector service for SolidFire all-flash storage
      Adding and registering additional clusters to the management node
      Configuring a proxy server
      Getting logs from management services
    Verifying management services version
    Updating management services
    Updating management services for dark sites
Using this Documentation Center
  Tour
  Help
    Searching for content
    Applying a filter
    Printing content
    Saving and sharing links
    Providing feedback
    Downloading PDFs or EPUBs for offline use
  Tips
    Better search results
    Mobile devices
    Mixed-language environment
  Tour
  Help
    Searching for content
    Applying a filter
    Printing content
    Saving and sharing links
    Providing feedback
    Downloading PDFs or EPUBs for offline use
  Tips
    Better search results
    Mobile devices
    Mixed-language environment
Legal notices
  Copyright, trademark, patent, and privacy
    Copyright
    Trademark
    Patent
    Privacy
  Open source
    Management node
    NetApp Element Plug-in for vCenter Server
    Element 11.3
  Copyright, trademark, patent, and privacy
    Copyright
    Trademark
    Patent
    Privacy
  Open source
    Management node
    NetApp Element Plug-in for vCenter Server
    Element 11.3
Introduction and concepts