SetSnmpACL

You can use the SetSnmpACL method to configure SNMP access permissions on the cluster nodes. The values you set with this interface apply to all nodes in the cluster, and the values that are passed replace all values set in any previous call to SetSnmpACL. Also note that the values set with this interface replace all network or usmUsers values set with the SetSnmpInfo.

Parameters

This method has the following input parameters:

Name Description Type Default value Required
networks List of networks and what type of access they have to the SNMP servers running on the cluster nodes. See SNMP network object for possible networks values. This parameter is required if SNMP v3 is disabled. network None No
usmUsers List of users and the type of access they have to the SNMP servers running on the cluster nodes. This parameter is required if SNMP v3 is enabled. usmUser None No

Return values

This method has no return values.

Request example

Requests for this method are similar to the following example:

{
  "method": "SetSnmpACL",
  "params": {
    "usmUsers"  : [
      {
         "name": "jdoe",
         "access": "rouser",
         "secLevel": "priv",
         "password": "mypassword",
         "passphrase": "mypassphrase",
      }
    ]
  },
  "id" : 1
}

Response example

This method returns a response similar to the following example:

{ 
  "id" : 1,   
  "result" : {} 
}