Configuring management node settings for QoSSIOC

You can configure the Element management node (mNode) settings using the NetApp Element Configuration extension point. These configurations are required to enable and use the QoSSIOC service.

Steps

  1. Select NetApp Element Configuration > mNode Settings.
  2. Click Actions.
  3. In the resulting menu, select Configure.
  4. In the Configure mNode Settings dialog box, enter the following information:
    • mNode IP Address/FQDN: The IP address of the management node for the cluster that contains the QoSSIOC service.
    • mNode Port: The port address for the management node that contains the QoSSIOC service. The default port is 8443.
    • mNode User ID: The user ID for the QoSSIOC service. The QoSSIOC service default user id is admin. For NetApp HCI, the user ID is the same one entered during installation using the NetApp Deployment Engine.
    • mNode Password: The password for the Element QoSSIOC service. The QoSSIOC service default password is solidfire. If you have not created a custom password, you can create one from the Registration UI (https://[management node IP]:9443).
    • vCenter User ID: The user name for the vCenter admin with full Administrator role privileges.
    • vCenter Password: The password for the vCenter admin with full Administrator role privileges.
  5. Click OK.
    The mNode Status field displays UP when the plug-in can successfully communicate with the service.
    Note: After you have configured a valid management node, these settings become the default. The mNode settings revert to the last known valid mNode settings until you provide settings for another valid management node. You must clear the settings for the configured management node before setting the credentials for a new management node.