Connecting the AC power cords

You must connect the AC power cords to the external power source and to the AC power connector on each controller. After you have connected the power cords, you can turn the power on.

About this task

Consider the following power source issues:

The following illustration shows the power cords:


Power cords
Warning
Warning: Risk of bodily injury. To remove all electrical current from the devices, make sure that all of the power cords are disconnected from the power source.

Steps

  1. Turn off the power switches in the enclosure or chassis.
  2. Turn off the power switches on the controllers.
  3. Connect the primary power cords from the cabinet to the external power sources.
  4. Connect the power cords to the AC power connector on each controller.