Installing the E5600SG controller in the enclosure

If the E5600SG controller is not installed when you receive the enclosure, you might need to install it into Slot B.

About this task

You can skip this procedure if the E5600SG controller is already installed in the enclosure.


  1. Remove the insert that was placed in Slot B for shipment.
    In the SG5660 enclosure, Slot B is the bottom slot. In the SG5612 enclosure, Slot B is the slot on the right.
  2. Install the E5600SG controller into Slot B.

After you finish

Continue with cabling the appliance.