Replacing the node for Storage Node recovery

To recover a non-appliance Storage Node, you must replace the node if the system drive has failed.

About this task

The node replacement procedure for each platform is identical for all types of grid node.

Linux: If you are not sure if your system drive has failed, following the instructions in Replacing a Linux node can help you determine which recovery steps are required.

Use the node replacement procedure for your platform:

After you finish

The procedure Replacing a Linux node will help you determine if grid node recovery is complete after you complete that procedure, and if not, the steps you need to take next.

In all other cases, after replacing the host go on to the procedure Selecting Start Recovery to configure the Storage Node.