Verifying network connections

You should confirm you can access the StorageGRID Webscale networks you are using from the E5700SG controller. To validate routing through network gateways, you should test connectivity between the E5700SG controller and IP addresses on different subnets.

Steps

  1. From the menu bar of the StorageGRID Webscale Appliance Installer, click Configure Networking > Ping Test.
    The Ping Test page appears.
    Screen shot of Ping Test option in StorageGRID Webscale Appliance Installer
  2. From the Network drop-down box, select the network you want to test: Grid, Admin, or Client.
  3. Enter the IPv4 address for a host on that network.
    For example, you might want to ping the gateway on the network or the primary Admin Node.
  4. Click Test Connectivity.
    If the network connection is valid, the "Ping test passed" message appears, with the ping command output listed.
    Screen shot of ping test results in StorageGRID Webscale Appliance Installer