Replacing other hardware components

You might need to replace a drive, fan, power supply, or battery in the StorageGRID Webscale appliance.

Before you begin

You have the E-Series hardware replacement procedure.

About this task

To replace a drive, power-fan canister, fan canister, power canister, battery, or drive drawer, refer to the standard procedures for the E2700 and E5600 storage arrays. Focus on the step-by-step instructions for removing and replacing the hardware itself; many of the SANtricity Storage Manager procedures do not apply to an appliance.
Model FRU See

SG5612

Drive Replacing a Drive in E2600, E2700, E5400, E5500, E5600 or 12-Drive or 24-Drive Trays
Power-fan canister Replacing a Failed Power-Fan Canister in the E5612 or the E5624 Controller-Drive Tray
Battery in the E2700 controller (requires removing the controller) Follow the steps in Replacing the E2700 controller, but install the new battery in the existing controller.
SG5660 Drive Replacing a Drive in E2660, E2760, E5460, E5560, or E5660 Trays
Power canister Replacing a Failed Power Canister in the E5660 Controller-Drive Tray
Fan canister Replacing a Failed Fan Canister in the E5660 Controller-Drive Tray
Battery in the E2700 controller (requires removing the controller) Follow the steps in Replacing the E2700 controller, but install the new battery in the existing controller.