Adding storage volumes to Storage Nodes

You can expand the storage capacity of non-appliance Storage Nodes that have fewer than 16 storage volumes by adding additional storage volumes. You might need to add storage volumes to more than one Storage Node to satisfy ILM requirements for replicated or erasure-coded copies.

About this task

The underlying storage of a Storage Node is divided into a fixed number of storage volumes. Storage volumes are block-based storage devices that are formatted by the StorageGRID system and mounted to store objects. Each Storage Node can support up to 16 storage volumes, which are called object stores in the Grid Manager.

Note: Object metadata is always stored to object store 0.

Each object store corresponds to a mount point on the same Storage Node. That is, the object store with an ID of 0000 corresponds to the /var/local/rangedb/0 mount point.

Before adding new storage volumes, use the Grid Manager to view the current object stores for each Storage Node as well as the corresponding mount points. You can use this information when adding storage volumes.

Steps

  1. To see the object stores for a Storage Node:
    1. Select Support > Grid Topology.
    2. Select site > Storage Node > LDR > Storage.
    3. On the Overview tab, view the details in the Object Stores table.


    This image is explained by the surrounding text.

  2. To see the mount points that correspond to those object stores:
    1. Select Support > Grid Topology.
    2. Select site > Storage Node > SSM > Resources.
    3. On the Overview tab, view the details in the Volumes table.


    This image is explained by the surrounding text.

  3. Follow the instructions for your platform to add new storage volumes to the Storage Node.