Powering down a host

Before you power down a host, you must stop services on all grid nodes on that host.

Steps

  1. From the service laptop, log in to the grid node:
    1. Enter the following command: ssh admin@grid_node_IP
    2. Enter the password listed in the Passwords.txt file.
    3. Enter the following command to switch to root: su -
    4. Enter the password listed in the Passwords.txt file.
    When you are logged in as root, the prompt changes from $ to #.
  2. Stop all services running on the grid node: service servermanager stop
    Wait a minimum of 30 minutes for the command to complete.
    Note: If you issue the service servermanager stop command to stop the services on an appliance Storage Node, you must power cycle the appliance to restart the node.
  3. Repeat steps 1 and 2 for each grid node on the host.
  4. If you have a Linux host:
    1. Log in to the host operating system.
    2. Stop the node: storagegrid node stop
    3. Shut down the host operating system.
  5. If the node is running on a VMware virtual machine or it is an appliance Storage Node, issue the shutdown command: shutdown -h now
    Perform this step regardless of the outcome of the service servermanager stop command.
    For the appliance, this command shuts down the compute controller, but the appliance is still powered on. You must complete the next step.
  6. If you are powering down an appliance Storage Node:
    • For the SG6000 appliance
      1. Wait for the green Cache Active LED on the back of the storage controller to turn off.

        This LED is on when cached data needs to be written to the drives. You must wait for this LED to turn off before you turn off power.

      2. Turn off the power to the appliance, and wait for the blue power LED to turn off.
    • For the SG5700 appliance
      1. Wait for the green Cache Active LED on the back of the storage controller to turn off.

        This LED is on when cached data needs to be written to the drives. You must wait for this LED to turn off before you turn off power.

      2. Turn off the power to the appliance, and wait for all LED and seven-segment display activity to stop.
  7. Log out of the command shell: exit