Skip to main content
HCI
1.10

NetApp Deployment Engine access options overview

Contributors

To deploy NetApp HCI, you need to access the NetApp Deployment Engine on one of the NetApp H-Series storage nodes via the IPv4 address assigned to the Bond1G interface, which is the logical interface that combines ports A and B for storage nodes. This storage node becomes the controlling storage node for the deployment process. Depending on your environment, you need to either configure the IPv4 address or retrieve it from one of the storage nodes.

Note You can only access the NetApp Deployment Engine using the Bond1G interface of a storage node. Using the Bond10G interface, the logical interface that combines ports C and D for storage nodes, is not supported.

Use one of the following methods that best describes your network environment to access the NetApp Deployment Engine:

Scenario Method

You do not have DHCP in your environment

Access the NetApp Deployment Engine in environments without DHCP

You have DHCP in your environment

Access the NetApp Deployment Engine in environments with DHCP

You want to assign all IP addresses manually

Manually assign IP addresses to access the NetApp Deployment Engine

Find more information