Skip to main content
OnCommand Unified Manager 9.5
A newer release of this product is available.

Configuration/Health Thresholds page for Qtrees

Contributors netapp-adityaw
PDFs

The Configuration/Health Thresholds page for Qtrees enables you to configure global health threshold values for monitored qtrees. Events are generated for a qtree only when a Qtree quota or a Default quota has been set on the qtree. Events are not generated if the space defined in a User quota or Group quota has exceeded the threshold.

You must have the OnCommand Administrator or Storage Administrator role.

Events are generated when a threshold is breached. You can take corrective actions for such events.

Capacity area

The Capacity area enables you to set the following qtree capacity threshold conditions.

  • Space Nearly Full

    Specifies the percentage at which a qtree is considered to be nearly full:

    • Default value: 80 percent

      The value for this threshold must be lower than the value for the Qtree Full threshold.

    • Event generated: Qtree Nearly Full

    • Event severity: Warning

  • Space Full

    Specifies the percentage at which a qtree is considered full:

    • Default value: 90 percent

    • Event generated: Qtree Full

    • Event severity: Error

Command buttons

  • Restore to Factory Defaults

    Enables you to restore the configuration settings to the factory default values.

  • Save

    Saves the configuration settings for the selected option.