Removing the power supplies when replacing a chassis involves turning off, disconnecting, and then removing the power supply from the old chassis.
Steps
- If you are not already grounded, properly ground yourself.
- Turn off the power supply and disconnect the power cables:
- Turn off the power switch on the power supply.
- Open the power cable retainer, and then unplug the power cable from the power supply.
- Unplug the power cable from the power source.
- Press and hold the orange button on the power supply handle, and then pull the power supply out of the chassis.
CAUTION:
When removing a power supply, always use two hands to support its weight.
 |
Locking button |
- Repeat the preceding steps for any remaining power supplies.