Rebooting the controller after FRU replacement

After you replace the FRU, you must reboot the controller module.


Boot to Maintenance mode:
  1. From the LOADER prompt, enter bye, and then boot the node to Maintenance mode, interrupting the boot process by pressing Ctrl-C when you see Press Ctrl-C for Boot Menu.
  2. Select the option to boot to Maintenance mode from the displayed menu.
Important: During the boot process, you might see the following prompts:
  • A prompt warning of a system ID mismatch and asking to override the system ID.
  • A prompt warning that when entering Maintenance mode in an HA configuration you must ensure that the healthy node remains down.

You can safely respond y to these prompts.