Skip to main content
NetApp data management solutions
Die deutsche Sprachversion wurde als Serviceleistung für Sie durch maschinelle Übersetzung erstellt. Bei eventuellen Unstimmigkeiten hat die englische Sprachversion Vorrang.

CIFS-Datenmigration mit ACLs von einer Quellspeicherbox zu ONTAP

Beitragende kevin-hoke
PDFs

In diesem Abschnitt wird das schrittweise Verfahren zum Migrieren von CIFS-Daten mit Sicherheitsinformationen von einem Quell- zu einem Ziel ONTAP System beschrieben.

  1. Stellen Sie sicher, dass das Ziel ONTAP -System fehlerfrei ist.

    C1_sti96-vsim-ucs540m_cluster::> cluster show
Node                  Health  Eligibility
--------------------- ------- ------------
sti96-vsim-ucs540m    true    true
sti96-vsim-ucs540n    true    true
2 entries were displayed.
C1_sti96-vsim-ucs540m_cluster::> node show
Node      Health Eligibility Uptime        Model       Owner    Location
--------- ------ ----------- ------------- ----------- -------- ---------------
sti96-vsim-ucs540m
          true   true        15 days 21:17 SIMBOX      ahammed  sti
sti96-vsim-ucs540n
          true   true        15 days 21:17 SIMBOX      ahammed  sti
2 entries were displayed.
cluster::>  storage failover show
                              Takeover
Node           Partner        Possible State Description
-------------- -------------- -------- -------------------------------------
sti96-vsim-ucs540m
               sti96-vsim-    true     Connected to sti96-vsim-ucs540n
               ucs540n
sti96-vsim-ucs540n
               sti96-vsim-    true     Connected to sti96-vsim-ucs540m
               ucs540m
2 entries were displayed.
C1_sti96-vsim-ucs540m_cluster::>

  2. Stellen Sie sicher, dass auf dem Zielsystem mindestens ein Nicht-Root-Aggregat vorhanden ist. Das Aggregat ist normal.

    cluster::*> storage aggregate show
Aggregate     Size Available Used% State   #Vols  Nodes            RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0_sti96_vsim_ucs540o
            7.58GB   373.3MB   95% online       1 sti96-vsim-      raid_dp,
                                                  ucs540o          normal
aggr0_sti96_vsim_ucs540p
            7.58GB   373.3MB   95% online       1 sti96-vsim-      raid_dp,
                                                  ucs540p          normal
aggr_001   103.7GB   93.63GB   10% online       1 sti96-vsim-      raid_dp,
                                                  ucs540p          normal
sti96_vsim_ucs540o_aggr1
           23.93GB   23.83GB    0% online       1 sti96-vsim-      raid_dp,
                                                  ucs540o          normal
sti96_vsim_ucs540p_aggr1
           23.93GB   23.93GB    0% online       0 sti96-vsim-      raid_dp,
                                                  ucs540p          normal
5 entries were displayed.
    Hinweis Wenn kein Datenaggregat vorhanden ist, erstellen Sie ein neues mit dem storage aggr create Befehl.

  3. Erstellen Sie eine SVM auf dem Zielclustersystem.

    cluster::*> vserver create -vserver vs1 -rootvolume root_vs1 -aggregate sti96_vsim_ucs540o_aggr1 -rootvolume-security-style mixed

Verify that the SVM was successfully created.
C2_sti96-vsim-ucs540o_cluster::*>  vserver show -vserver vs1
                                    Vserver: vs1
                               Vserver Type: data
                            Vserver Subtype: default
                               Vserver UUID: f8bc54be-d91b-11e9-b99c-005056a7e57e
                                Root Volume: root_vs1
                                  Aggregate: sti96_vsim_ucs540o_aggr1
                                 NIS Domain: NSQA-RTP-NIS1
                 Root Volume Security Style: mixed
                                LDAP Client: esisconfig
               Default Volume Language Code: C.UTF-8
                            Snapshot Policy: default
                              Data Services: data-nfs, data-cifs,
                                             data-flexcache, data-iscsi
                                    Comment: vs1
                               Quota Policy: default
                List of Aggregates Assigned: -
 Limit on Maximum Number of Volumes allowed: unlimited
                        Vserver Admin State: running
                  Vserver Operational State: running
   Vserver Operational State Stopped Reason: -
                          Allowed Protocols: nfs, cifs, fcp, iscsi, ndmp
                       Disallowed Protocols: -
            Is Vserver with Infinite Volume: false
                           QoS Policy Group: -
                        Caching Policy Name: -
                                Config Lock: false
             Volume Delete Retention Period: 0
                               IPspace Name: Default
                         Foreground Process: -
                   Is Msid Preserved for DR: false
Force start required to start Destination in muliple IDP fan-out case: false
                    Logical Space Reporting: false
                  Logical Space Enforcement: false

  4. Erstellen Sie ein neues Lese-/Schreibdatenvolume auf der Ziel-SVM. Überprüfen Sie, ob Sicherheitsstil, Spracheinstellungen und Kapazitätsanforderungen mit dem Quellvolume übereinstimmen.

    CLUSTER CLUSTER::> vol create -vserver vs1 -volume dest_vol -aggregate aggr_001 -size 150g type RW -state online -security-style ntfs

  5. Erstellen Sie ein Daten-LIF, um SMB-Clientanforderungen zu bedienen.

    CLUSTER::> network interface create -vserver vs1 -lif sti96-vsim-ucs540o_data1  -address 10.237.165.87 -netmask 255.255.240.0 -role data -data-protocol nfs,cifs -home-node sti96-vsim-ucs540o  -home-port e0d

    Überprüfen Sie, ob das LIF erfolgreich erstellt wurde.

    cluster::*>  network interface show -vserver vs1
            Logical    Status     Network            Current       Current Is
Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
----------- ---------- ---------- ------------------ ------------- ------- ----
vs1
            sti96-vsim-ucs540o_data1
                         up/up    10.237.165.87/20   sti96-vsim-ucs540o
                                                                   e0d     true

  6. Erstellen Sie bei Bedarf eine statische Route mit der SVM.

    Network route create -vserver dest -destination 0.0.0.0/0 -gateway 10.237.160.1

    Überprüfen Sie, ob die Route erfolgreich erstellt wurde.

    cluster::*>  network route show -vserver vs1
Vserver             Destination     Gateway         Metric
------------------- --------------- --------------- ------
vs1
                    0.0.0.0/0       10.237.160.1    20
                    ::/0            fd20:8b1e:b255:9155::1
                                                    20
2 entries were displayed.

  7. Mounten Sie das Zieldatenvolume im SVM-Namespace.

    CLUSTER::> volume mount -vserver vs1 -volume dest_vol  -junction-path /dest_vol -active true

    Überprüfen Sie, ob das Volume erfolgreich gemountet wurde.

    cluster::*> volume show -vserver vs1  -fields junction-path
vserver volume   junction-path
------- -------- -------------
vs1     dest_vol /dest_vol
vs1     root_vs1 /
2 entries were displayed.
Note: You can also specify the volume mount options (junction path) with the volume create command.

  8. Starten Sie den CIFs-Dienst auf der Ziel-SVM.

    cluster::*> vserver cifs start -vserver vs1
Warning: The admin status of the CIFS server for Vserver "vs1" is already "up".

    Stellen Sie sicher, dass der Dienst gestartet und ausgeführt wird.

    cluster::*>
Verify the service is started and running
C2_sti96-vsim-ucs540o_cluster::*> cifs show
            Server          Status    Domain/Workgroup Authentication
Vserver     Name            Admin     Name             Style
----------- --------------- --------- ---------------- --------------
vs1         D60AB15C2AFC4D6 up        CTL              domain

  9. Stellen Sie sicher, dass die Standardexportrichtlinie auf die Ziel-SVM angewendet wird.

    CLUSTER::> vserver export-policy show -vserver dest
Vserver          Policy Name
---------------  -------------------
dest             default

    Erstellen Sie bei Bedarf eine neue benutzerdefinierte Exportrichtlinie für die Ziel-SVM.

    CLUSTER::> vserver export-policy create -vserver vs1 -policyname xcpexport

  10. Ändern Sie die Exportrichtlinienregeln, um den Zugriff auf CIF-Clients zu ermöglichen.

    CLUSTER::> export-policy rule modify -vserver dest -ruleindex 1 -policyname xcpexportpolicy -clientmatch 0.0.0.0/0 -rorule any -rwrule any -anon 0

    Überprüfen Sie, ob die Richtlinienregeln geändert wurden.

    cluster::*> export-policy rule show -instance
                                    Vserver: vs1
                                Policy Name: default
                                 Rule Index: 1
                            Access Protocol: any
List of Client Match Hostnames, IP Addresses, Netgroups, or Domains: 0.0.0.0/0
                             RO Access Rule: any
                             RW Access Rule: any
User ID To Which Anonymous Users Are Mapped: 65534
                   Superuser Security Types: any
               Honor SetUID Bits in SETATTR: true
                  Allow Creation of Devices: true
                 NTFS Unix Security Options: fail
         Vserver NTFS Unix Security Options: use_export_policy
                      Change Ownership Mode: restricted
              Vserver Change Ownership Mode: use_export_policy
                                  Policy ID: 12884901889
                                    Vserver: vs1
                                Policy Name: default
                                 Rule Index: 2
                            Access Protocol: any
List of Client Match Hostnames, IP Addresses, Netgroups, or Domains: 0:0:0:0:0:0:0:0/0
                             RO Access Rule: any
                             RW Access Rule: any
User ID To Which Anonymous Users Are Mapped: 65534
                   Superuser Security Types: none
               Honor SetUID Bits in SETATTR: true
                  Allow Creation of Devices: true
                 NTFS Unix Security Options: fail
         Vserver NTFS Unix Security Options: use_export_policy
                      Change Ownership Mode: restricted
              Vserver Change Ownership Mode: use_export_policy
                                  Policy ID: 12884901889
2 entries were displayed.

  11. Stellen Sie sicher, dass dem Client der Zugriff auf das Volume gestattet ist.

    cluster::*> export-policy check-access -vserver vs1 -volume dest_vol -client-ip 10.234.17.81 -authentication-method none -protocol cifs -access-type read-write
                                         Policy    Policy       Rule
Path                          Policy     Owner     Owner Type  Index Access
----------------------------- ---------- --------- ---------- ------ ----------
/                             default    root_vs1  volume          1 read
/dest_vol                     default    dest_vol  volume          1 read-write
2 entries were displayed.

  12. Stellen Sie eine Verbindung zum Windows-Clientsystem her, auf dem XCP installiert ist. Navigieren Sie zum XCP-Installationspfad.

    C:\WRSHDNT>dir c:\netapp\xcp
dir c:\netapp\xcp
 Volume in drive C has no label.
 Volume Serial Number is 5C04-C0C7
 Directory of c:\netapp\xcp
09/18/2019  09:30 AM    <DIR>          .
09/18/2019  09:30 AM    <DIR>          ..
06/25/2019  06:27 AM               304 license
09/18/2019  09:30 AM    <DIR>          Logs
09/29/2019  08:45 PM        12,143,105 xcp.exe
               2 File(s)     12,143,409 bytes
               3 Dir(s)  29,219,549,184 bytes free

  13. Fragen Sie die SMB-Exporte des Quellknotens ab, indem Sie Folgendes ausführen: xcp show Befehl auf dem XCP-Windows-Client-Hostsystem.

    C:\WRSHDNT>c:\netapp\xcp\xcp show \\10.237.165.71
c:\netapp\xcp\xcp show \\10.237.165.71
XCP SMB 1.6; (c) 2020 NetApp, Inc.; Licensed to XXX [NetApp Inc] until Mon Dec 31 00:00:00 2029
 Shares   Errors   Server
      6        0            10.237.165.71
== SMB Shares ==
 Space   Space   Current
 Free    Used    Connections Share Path                   Folder Path
 9.50GiB 4.57MiB 1           \\10.237.165.71\source_share C:\source_vol
 94.3MiB 716KiB  0           \\10.237.165.71\ROOTSHARE    C:\
 0       0       N/A         \\10.237.165.71\ipc$         N/A
 94.3MiB 716KiB  0           \\10.237.165.71\c$           C:\
== Attributes of SMB Shares ==
 Share                             Types                             Remark
 source_share                      DISKTREE
 test share                        DISKTREE
 test_sh                           DISKTREE
 ROOTSHARE                         DISKTREE             \"Share mapped to top of Vserver global namespace, created bydeux_init \"
 ipc$                              PRINTQ,SPECIAL,IPC,DEVICE
 c$                                SPECIAL
== Permissions of SMB Shares ==
 Share                             Entity                                         Type
 source_share                      Everyone                                       Allow/Full Control
ROOTSHARE                         Everyone                                       Allow/Full Control
 ipc$                              Everyone                                       Allow/Full Control
 c$                                Administrators                                 Allow/Full Control/

  14. Führen Sie den help Befehl zum Kopieren.

    C:\WRSHDNT>c:\netapp\xcp\xcp help copy
c:\netapp\xcp\xcp help copy
XCP SMB 1.6; (c) 2020 NetApp, Inc.; Licensed to XXX [NetApp Inc] until Mon Dec 31 00:00:00 2029
usage: xcp copy [-h] [-v] [-parallel <n>] [-match <filter>] [-preserve-atime]
                [-acl] [-fallback-user FALLBACK_USER]
                [-fallback-group FALLBACK_GROUP] [-root]
                source target
positional arguments:
  source
  target
optional arguments:
  -h, --help            show this help message and exit
  -v                    increase debug verbosity
  -parallel <n>         number of concurrent processes (default: <cpu-count>)
  -match <filter>       only process files and directories that match the
                        filter (see `xcp help -match` for details)
  -preserve-atime       restore last accessed date on source
  -acl                  copy security information
  -fallback-user FALLBACK_USER
                        the name of the user on the target machine to receive
                        the permissions of local (non-domain) source machine
                        users (eg. domain\administrator)
  -fallback-group FALLBACK_GROUP
                        the name of the group on the target machine to receive
                        the permissions of local (non-domain) source machine
                        groups (eg. domain\administrators)
  -root                 copy acl for root directorytxt

  15. Rufen Sie auf dem Ziel ONTAP -System die Liste der lokalen Benutzer- und Gruppennamen ab, die Sie als Werte für die fallback-user Und fallback-group Argumentpfad.

    cluster::*> local-user show
  (vserver cifs users-and-groups local-user show)
Vserver      User Name                   Full Name            Description
------------ --------------------------- -------------------- -------------
vs1          D60AB15C2AFC4D6\Administrator
                                                              Built-in administrator account
C2_sti96-vsim-ucs540o_cluster::*>  local-group show
  (vserver cifs users-and-groups local-group show)
Vserver        Group Name                       Description
-------------- -------------------------------- ----------------------------
vs1            BUILTIN\Administrators           Built-in Administrators group
vs1            BUILTIN\Backup Operators         Backup Operators group
vs1            BUILTIN\Guests                   Built-in Guests Group
vs1            BUILTIN\Power Users              Restricted administrative privileges
vs1            BUILTIN\Users                    All users
5 entries were displayed

  16. Um die CIF-Daten mit ACLs von der Quelle zum Ziel zu migrieren, führen Sie den xcp copy Befehl mit dem -acl Und –fallback-user/group Optionen.

    Für die fallback-user/group Geben Sie in den Optionen einen beliebigen Benutzer oder eine beliebige Gruppe an, die im Active Directory oder als lokaler Benutzer/Gruppe für das Zielsystem gefunden werden kann.

    C:\WRSHDNT>c:\netapp\xcp\xcp copy -acl -fallback-user D60AB15C2AFC4D6\Administrator -fallback-group BUILTIN\Users  \\10.237.165.79\source_share \\10.237.165.89\dest_share
c:\netapp\xcp\xcp copy -acl -fallback-user D60AB15C2AFC4D6\Administrator -fallback-group BUILTIN\Users  \\10.237.165.79\source_share \\10.237.165.89\dest_share
XCP SMB 1.6; (c) 2020 NetApp, Inc.; Licensed to XXX [NetApp Inc] until Mon Dec 31 00:00:00 2029
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 8s
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 13s
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 18s
ERROR failed to obtain fallback security principal "BUILTIN\Users". Please check if the principal with the name "BUILTIN\Users" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "D60AB15C2AFC4D6\Administrator". Please check if the principal with the name "D60AB15C2AFC4D6\Administrator" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "BUILTIN\Users". Please check if the principal with the name "BUILTIN\Users" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "BUILTIN\Users". Please check if the principal with the name "BUILTIN\Users" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "BUILTIN\Users". Please check if the principal with the name "BUILTIN\Users" exists on "D60AB15C2AFC4D6".
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 23s
ERROR failed to obtain fallback security principal "D60AB15C2AFC4D6\Administrator". Please check if the principal with the name "D60AB15C2AFC4D6\Administrator" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "D60AB15C2AFC4D6\Administrator". Please check if the principal with the name "D60AB15C2AFC4D6\Administrator" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "D60AB15C2AFC4D6\Administrator". Please check if the principal with the name "D60AB15C2AFC4D6\Administrator" exists on "D60AB15C2AFC4D6".
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 28s
753 scanned, 0 errors, 0 skipped, 249 copied, 24.0KiB (4.82KiB/s), 33s
753 scanned, 0 errors, 0 skipped, 744 copied, 54.4KiB (6.07KiB/s), 38s
753 scanned, 0 errors, 0 skipped, 746 copied, 54.5KiB (20/s), 43s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (1.23KiB/s), 44s
C:\WRSHDNT>

  17. Wenn xcp copy führt zur Fehlermeldung ERROR failed to obtain fallback security principal , fügen Sie das Zielfeld in der Hosts-Datei hinzu(C:\Windows\System32\drivers\etc\hosts ).

    Verwenden Sie das folgende Format für den Eintrag im Feld „NetApp -Speicherziel“.

    <data vserver data interface ip> 1 or more white spaces <cifs server name>
    cluster::*> cifs show
            Server          Status    Domain/Workgroup Authentication
Vserver     Name            Admin     Name             Style
----------- --------------- --------- ---------------- --------------
vs1         D60AB15C2AFC4D6 up        CTL              domain
C2_sti96-vsim-ucs540o_cluster::*> network interface show
            Logical    Status     Network            Current       Current Is
Cluster
            sti96-vsim-ucs540p_clus1
                         up/up    192.168.148.136/24 sti96-vsim-ucs540p
                                                                   e0a     true
            sti96-vsim-ucs540p_clus2
                         up/up    192.168.148.137/24 sti96-vsim-ucs540p
                                                                   e0b     true
vs1
            sti96-vsim-ucs540o_data1
                         up/up    10.237.165.87/20   sti96-vsim-ucs540o
                                                                   e0d     true
            sti96-vsim-ucs540o_data1_inet6
                         up/up    fd20:8b1e:b255:9155::583/64
                                                     sti96-vsim-ucs540o
                                                                   e0d     true
            sti96-vsim-ucs540o_data2
                         up/up    10.237.165.88/20   sti96-vsim-ucs540o
                                                                   e0e     true
10.237.165.87  D60AB15C2AFC4D6  -> destination box entry to be added in hosts file.

  18. Wenn die Fehlermeldung weiterhin angezeigt wird ERROR failed to obtain fallback security principal Nach dem Hinzufügen des Zielfeldeintrags in den Hosts-Dateien ist der Benutzer/die Gruppe im Zielsystem nicht vorhanden.

    C:\WRSHDNT>c:\netapp\xcp\xcp copy -acl -fallback-user D60AB15C2AFC4D6\unknown_user -fallback-group BUILTIN\Users  \\10.237.165.79\source_share \\10.237.165.89\dest_share
c:\netapp\xcp\xcp copy -acl -fallback-user D60AB15C2AFC4D6\unknown_user -fallback-group BUILTIN\Users  \\10.237.165.79\source_share \\10.237.165.89\dest_share
XCP SMB 1.6; (c) 2020 NetApp, Inc.; Licensed to XXX [NetApp Inc] until Mon Dec 31 00:00:00 2029
ERROR failed to obtain fallback security principal "D60AB15C2AFC4D6\unknown_user". Please check if the principal with the name "D60AB15C2AFC4D6\unknown_user" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "D60AB15C2AFC4D6\unknown_user". Please check if the principal with the name "D60AB15C2AFC4D6\unknown_user" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "D60AB15C2AFC4D6\unknown_user". Please check if the principal with the name "D60AB15C2AFC4D6\unknown_user" exists on "D60AB15C2AFC4D6".
ERROR failed to obtain fallback security principal "D60AB15C2AFC4D6\unknown_user". Please check if the principal with the name "D60AB15C2AFC4D6\unknown_user" exists on "D60AB15C2AFC4D6".
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 5s
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 10s
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 15s
753 scanned, 0 errors, 0 skipped, 284 copied, 27.6KiB (5.54KiB/s), 20s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (2.44KiB/s), 22s
C:\WRSHDNT>

  19. Verwenden xcp copy um CIF-Daten mit ACLs zu migrieren (mit oder ohne Stammordner).

    Führen Sie ohne den Stammordner die folgenden Befehle aus:

    C:\WRSHDNT>c:\netapp\xcp\xcp copy -acl -fallback-user  D60AB15C2AFC4D6\Administrator -fallback-group BUILTIN\Users  \\10.237.165.79\source_share \\10.237.165.89\dest_share
c:\netapp\xcp\xcp copy -acl -fallback-user  D60AB15C2AFC4D6\Administrator -fallback-group BUILTIN\Users  \\10.237.165.79\source_share \\10.237.165.89\dest_share
XCP SMB 1.6; (c) 2020 NetApp, Inc.; Licensed to XXX [NetApp Inc] until Mon Dec 31 00:00:00 2029
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 5s
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 10s
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 15s
753 scanned, 0 errors, 0 skipped, 210 copied, 20.4KiB (4.08KiB/s), 20s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (2.38KiB/s), 22s
C:\WRSHDNT>

    Führen Sie im Stammordner die folgenden Befehle aus:

    C:\WRSHDNT>c:\netapp\xcp\xcp copy -acl -root  -fallback-user  D60AB15C2AFC4D6\Administrator -fallback-group BUILTIN\Users  \\10.237.165.79\source_share \\10.237.165.89\dest_share
c:\netapp\xcp\xcp copy -acl -root  -fallback-user  D60AB15C2AFC4D6\Administrator -fallback-group BUILTIN\Users  \\10.237.165.79\source_share \\10.237.165.89\dest_share
XCP SMB 1.6; (c) 2020 NetApp, Inc.; Licensed to XXX [NetApp Inc] until Mon Dec 31 00:00:00 2029
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 5s
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 10s
753 scanned, 0 errors, 0 skipped, 0 copied, 0 (0/s), 15s
753 scanned, 0 errors, 0 skipped, 243 copied, 23.6KiB (4.73KiB/s), 20s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (6.21KiB/s), 25s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (0/s), 30s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (0/s), 35s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (0/s), 40s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (0/s), 45s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (0/s), 50s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (0/s), 55s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (0/s), 1m0s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (0/s), 1m5s
753 scanned, 0 errors, 0 skipped, 752 copied, 54.7KiB (817/s), 1m8s
C:\WRSHDNT>