Skip to main content
E-Series Systems

Re-install E2800 controller canister

Contributors NetAppZacharyWambold netapp-jolieg

Reinstall the controller canister into the controller shelf after installing the new battery.

Steps
  1. Reinstall the cover on the controller canister by sliding the cover from back to front until the button clicks.

  2. Turn the controller canister over, so that the removable cover faces down.

  3. With the cam handle in the open position, slide the controller canister all the way into the controller shelf.

    28 dwg e2824 remove controller canister maint e2800

    (1) Controller canister

    (2) Cam handle

    28 dwg e2860 add controller canister maint e2800

    (1) Controller canister

    (2) Cam handle

  4. Move the cam handle to the left to lock the controller canister in place.

  5. Reconnect all the cables.

  6. Go to Complete E2800 battery replacement.