Remounting volumes on a VMware host

You address problems that might appear on VMware hosts after the controller upgrade.

About this task

After you replace the controllers, you might observe the following conditions:

Procedure

  1. Perform a rescan on the each host.
  2. Halt all host I/O operations to this subsystem.
  3. Reclaim the volumes under NetApp rule.
    1. Run the esxcli storage core device list command. Check the output from the command to identify volumes whose names have the form aa.xxxx.
    2. Run the command do esxcli storage core claiming reclaim -d naa.xxxxx to change the LSI vendor ID to NetApp.