After installing the hardware

After you have installed the EF300 or EF600 hardware, use the SANtricity software to configure and manage your storage system.

Before you begin

  • You have configured your management ports and have verified and recorded your password and IP addresses.

Procedure

Connect your controller to a web browser, and use SANtricity System Manager to manage your EF300 or EF600 series storage system.
  • Note: You use the same IP addresses that you used to configure your management ports to access SANtricity System Manager.

If you are cabling your EF300 for SAS expansion see the Maintaining EF600 Hardware for SAS expansion card installation and the Cabling E-Series hardware for SAS expansion cabling.