Remove the power supply so you can install it in the new controller. When you remove a power supply, you disconnect the
power cord, and slide the part out of the shelf.
Before you begin
- You have an ESD wristband, or you have taken other antistatic precautions.
Procedure
- Disconnect the power cables:
- Open the power cord retainer, and then unplug the power cord from the power supply.
- Unplug the power cord from the power source.
- Locate the tab to the right of the power supply and press it towards the power supply
unit.

- Locate the handle on the front of the power supply.
- Use the handle to slide the power supply straight out of the system.

Attention: When removing a power supply, always use two hands to support its weight.
After you finish
Go to Remove
DIMMs.