After you move the cabinet, lower the leveling feet and the stability foot, reinstall the components you removed, install other required components, and connect the cabinet to power.
Steps
Lower leveling feet and stability foot
You stabilize the cabinet by adjusting its feet. The leveling feet support the cabinet off the casters. The stability foot prevents the cabinet from falling over after it is placed in its permanent location
Reinstall trays
After you move the cabinet, you can reinstall the trays in their original locations.
Install cable spools and tie wraps
After you reinstall the trays, install the cable spools and tie wraps. The cable spools and tie wraps accommodate excess cable length and cable routing for the controllers and the trays.
Install additional trays
If needed, you can install additional trays. You must cover unused positions for trays to assure correct air flow.
Install additional mounting rails
If you are installing controller-drive trays, or drive trays that were shipped separately (not already installed in the cabinet), you might need to install additional mounting rails in the cabinet.