Skip to main content
E-Series Systems

Ethernet cabling for a management station

Contributors netapp-jolieg

You can connect your storage system to an Ethernet network for out-of-band storage array management. You must use Ethernet cables for all storage array management connections.

Direct topology

A direct topology connects your controller directly to an Ethernet network.

You must connect management port 1 on each controller for out-of-band management and leave port 2 available for access to the storage array by technical support.

74167
Figure 1. Direct storage management connections

Fabric topology

A fabric topology uses a switch to connect your controller to an Ethernet network.

You must connect management port 1 on each controller for out-of-band management and leave port 2 available for access to the storage array by technical support.

74110
Figure 2. Fabric storage management connections