Show SNMP MIB II system group variables

The show snmpSystemVariables command returns information about the Simple Network Management Protocol (SNMP) system variables. The system variables are maintained in a Management Information Base II (MIB-II) database.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin or Storage Monitor role.

Syntax

show snmpSystemVariables

Parameters

None.

Notes

This command returns SNMP system variables information similar to this example.

SYSTEM VARIABLES
    Sys Name: NONE
    Sys Contact: NONE
    Sys Location: NONE

Minimum firmware level

8.30