Save storage array iSCSI statistics

The save storageArray iscsiStatistics command saves the iSCSI performance statistics of the storage array to a file.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Important: This command is deprecated and is replaced by the Save storage array host port statistics command.

Syntax

save storageArray iscsiStatistics [(raw | baseline)] file="filename"

Parameters

Parameter	Description
raw	The statistics collected are all statistics from the controller start-of-day. Enclose the parameter in square brackets ([ ]).
baseline	The statistics that are collected are all statistics from the time the controllers were reset to zero using the reset storageArray ibStatsBaseline command. Enclose the parameter in square brackets ([ ]).
file	The file path and the file name to which you want to save the performance statistics. Enclose the file name in double quotation marks (" "). For example: file="C:\Program Files\CLI\logs\iscsistat.csv" The default name of the file that contains the iSCSI performance statistics is iscsi-statistics.csv. You can use any file name, but you must use the .csv extension.

Parameter

Description

raw

The statistics collected are all statistics from the controller start-of-day. Enclose the parameter in square brackets ([ ]).

baseline

The statistics that are collected are all statistics from the time the controllers were reset to zero using the reset storageArray ibStatsBaseline command. Enclose the parameter in square brackets ([ ]).

file

The file path and the file name to which you want to save the performance statistics. Enclose the file name in double quotation marks (" "). For example:

file="C:\Program Files\CLI\logs\iscsistat.csv"

The default name of the file that contains the iSCSI performance statistics is iscsi-statistics.csv. You can use any file name, but you must use the .csv extension.

Notes

If you have not reset the iSCSI baseline statistics since the controller start-of-day, the time at the start-of-day is the default baseline time.

Minimum firmware level

7.10

8.41 This command is deprecated.