Start SSD cache locate

The start ssdCache locate command identifies the Solid State Disks (SSDs) that are logically grouped together to form the SSD cache by blinking the indicator lights on the SSDs.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, and E5700 arrays, as long as all SMcli packages are installed.


To execute this command on an E2800 or E5700 storage array, you must have the Support Admin role.


Use the stop ssdCache locate command to turn off the indicator lights on the drives.


start ssdCache [ssdCacheName] locate


Parameter Description
ssdCache The name of the SSD cache that you want to locate. Enclose the SSD cache name in square brackets ([ ]). If the SSD cache name contains special characters or consists only of numbers, you must enclose the SSD cache name in double quotation marks (" ") inside square brackets.

Minimum firmware level