The show storageArray dbmDatabase command retrieves and shows metadata for the on-board backup locations of a storage array. When there are multiple backup locations, metadata is shown for each location.
This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.
To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Storage Monitor role.
show storageArray dbmDatabase
None.
This command returns the configuration database information in a format similar to this example.
Configuration Database MetadataLast Host Backup: <date stamp> |
||||||
CTL |
LOCATION |
REVISION |
ID |
GEN NUMBER |
STATUS |
ACCESS MODE |
A |
Cache |
X.Y |
999999 |
999999 |
R/W |
Optimal |
B |
Cache |
X.Y |
999999 |
999999 |
R/W |
Optimal |
N/A |
Disk |
X.Y |
999999 |
999999 |
R/W |
Optimal |
7.83