Show signed certificate

The show controller arrayManagementSignedCertificate summary command displays the current signed certificate summary from the specified controller.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.

Syntax

show controller [(a|b)] arrayManagementSignedCertificate summary

Parameters

Parameter Description
controller Allows you to specify the controller on which you want to retrieve the root/intermediate certificates. Valid controller identifiers are a or b, where a is the controller in slot A, and b is the controller in slot B. Enclose the controller identifier in square brackets ([ ]).

Example

Sample output may be different than illustrated below.

SMcli -n Array1 -c "show controller[a] arrayManagementSignedCertificate all summary;"

============================
Controller A Signed Certificate
============================
Subject DN:   CN=Corp Issuing CA 1
Issuer DN:    CN=Corp Root CA
Start:        <date>
Expire:       <date>

SMcli completed successfully.

Minimum firmware level

8.40