Exit status

This table lists the exit statuses that might be returned and the meaning of each status.

Status Value Error Name Meaning
0 SUCCESSFUL The command terminated without an error.
1 INVALID_USAGE The command terminated with an error. Information about the error also appears.
2 SCRIPT_FILE_DOES_NOT_EXIST The script file does not exist.
3 ERROR_OPENING_OUTPUT_FILE An error occurred while opening an output file.
4 NO_STORAGE_ARRAY_AT_ADDRESS A storage array was not at the specified address.
5 ADDRESSES_SPECIFY_DIFFERENT_ARRAYS Addresses specify different storage arrays.
6 NO_SANAME_FOR_HOST_AGENT_CONNECT A storage array name does not exist for the host agent that is connected.
7 SANAME_NOT_AT_ADDRESS The storage array name was not at the specified address.
8 SANAME_NOT_UNIQUE The storage array name was not unique.
9 SANAME_NOT_IN_CONFIG_FILES The storage array name was not in the configuration file.
10 NO_MANAGEMENT_CLASS_FOR_SA A management class does not exist for the storage array.
11 NO_SA_IN_CONFIG_FILE_FOUND A storage array was not found in the configuration file.
12 INTERNAL_ERROR An internal error occurred.

This exit status indicates that you do not have privileges for running a CLI command from the command line. You must have administrator privileges to run all of the CLI commands from a command line.

13 INVALID_SCRIPT_SYNTAX Invalid script syntax was found.
14 UNABLE_TO_COMMUNICATE The controller was unable to communicate with the storage array.
15 DUPLICATE_ARGUMENT A duplicate argument was entered.
16 EXECUTION_ERROR An execution error occurred.
17 NO_HOST_AT_ADDRESS A host was not at the specified address.
18 WWNAME_NOT_IN_CONFIG_FILES The WWID was not in the configuration file.
19 WWNAME_NOT_AT_ADDRESS The WWID was not at the address.
20 UNKNOWN_IP An unknown IP address was specified.
21 PM_CONFIG_FILE_CORRUPTED The Event Monitor configuration file was corrupted.
22 UNABLE_TO_COMMUNICATE_TO_PM The storage array was unable to communicate with the Event Monitor.
23 UNEXIST_ALERT The controller was unable to write alert settings.
24 WRONG_ORGANIZER_NODE The wrong organizer node was specified.
25 CMD_NOT_AVAILABLE The command was not available.
26 DEVICE_NOT_IN_CONFIG_FILE The device was not in the configuration file.
27 ERROR_UPDATING_CONFIG_FILE An error occurred while updating the configuration file.
28 UNKNOWN_HOST_ERROR An unknown host error occurred.
29 SENDER_CONTACT_FILE_NOT_FOUND The sender contact information file was not found.
30 READ_SENDER_CONTACT_FILE_FAILED The sender contact information file could not be read.
31 USERDATA_FILE_EXISTS The userdata.txt file exists.
32 BAD_EMAIL_INFORMATION_TO_INCLUDE An invalid -I value in the email alert notification was specified.
33 BAD_EMAIL_FREQUENCY An invalid -f value in the email alert notification was specified.
34 OPTION_REMOVED The -r option is not supported anymore.
35 UNKNOWN_ALERT_PRIORITY Invalid alert severity specified.
36 PASSWORD_REQUIRED The operation needs either the Administrator or Monitor password to be set.
37 INVALID_MONITOR_PASSWORD The operation cannot be completed because an invalid Monitor password was entered.
38 INVALID_ADMIN_PASSWORD The operation cannot be completed because an invalid Administrator password was entered.
39 EXCEEDED_MAX_CHARS_FOR_PASSWORD The password provided is exceeding the character limit.
40 INVALID_MONITOR_TOKEN The -R monitor is not supported for this array. Use a valid role and retry the operation.
41 ASUP_CONFIG_ERROR An error occurred while writing to or reading from the AutoSupport configuration file. Please retry this operation again.
42 MAIL_SERVER_UNKNOWN Host address or mail server address is incorrect.
43 ASUP_SMTP_REPLY_ADDRESS_REQUIRED No healthy ASUP enabled arrays detected while attempting ASUP configuration test.
44 NO_ASUP_ARRAYS_DETECTED Reply email request required if ASUP delivery type is SMTP.
45 ASUP_INVALID_MAIL_RELAY_SERVER Unable to validate ASUP mail relay server.
46 ASUP_INVALID_SENDER_EMAIL Sender email address you specified is not a valid format.
47 ASUP_INVALID_PAC_SCRIPT Proxy Auto-Configuration (PAC) script file is a not a valid URL.
48 ASUP_INVALID_PROXY_SERVER_HOST_ADDRESS The Host address specified cannot be found or is in an incorrect format.
49 ASUP_INVALID_PROXY_SERVER_PORT_NUMBER The port number you specified is an invalid format.
50 ASUP_INVALID_AUTHENTICATION_PARAMETER The username or password you specified is invalid.
51 ASUP_INVALID_DAILY_TIME_PARAMETER The daily time parameter specified is invalid.
52 ASUP_INVALID_DAY_OF_WEEK_PARAMETER The -dayOfWeek parameter(s) that have been entered are invalid.
53 ASUP_INVALID_WEEKLY_TIME_PARAMETER The weekly time parameter is not valid.
54 ASUP_INVALID_SCHEDULE_PARSING Unable to successfully parse the schedule information provided.
55 ASUP_INVALID_SA_SPECIFIED Invalid storage array specifier provided.
56 ASUP_INVALID_INPUT_ARCHIVE The input archive entered is invalid. The input archive parameter must be in the form of -inputArchive=<n>where -n is an integer from 0 to 5.
57 ASUP_INVALID_OUTPUT_LOG A valid output log was not specified.
58 ASUP_TRANSMISSION_FILE_COPY_ERROR There was an error trying to copy the AutoSupport transmission log file. The transmission log either does not exist or there was an IO error trying to copy its data.
59 ASUP_DUPLICATE_NAMED_ARRAYS More than one storage array with the same name was found. Please retry the command using the world-wide-name parameter, -w <WWID>.
60 ASUP_NO_SPECIFIED_ARRAY_FOUND The specified storage array with the -n <storage-system-name> parameter is not present or is not supported for this command.
61 ASUP_NO_SPECIFIED_WWID_FOUND The specified storage array with the -w <WWID> parameter is not present or is not supported for this command.
62 ASUP_FILTERED_TRANSMISSION_LOG_ERROR There was an unknown error trying to obtain the filtered transmission log.
63 ASUP_TRANSMISSION_ARCHIVE_DOES_NOT_EXIST The AutoSupport input archive transmission log specified with the-inputArchive=<n> parameter does not exist.
64 NO_VALID_REST_CLIENT_DISCOVERED Unable to communicate with the storage array via https.
65 INVALID_CLI_VERSION The client CLI version is not compatible with the CLI version running on the storage array.
66 INVALID_USERNAME_OR_PASSWORD The username or password entered is invalid.
67 UNTRUSTED_CONNECTION Unable to establish a secure connection to the storage array.
68 INVALID_PASSWORD_FILE The password file cannot be found or is not readable.