Enable disk pool security

The enable diskPool security command converts a non-secure disk pool to a secure disk pool.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Context

Note: All of the drives that comprise the disk pool must be secure-capable.

Syntax

enable diskPool [diskPoolName] security

Parameter

Parameter Description
diskPool The name of the disk pool that you want to place in the Security Enabled state. Enclose the disk pool identifier in square brackets ([ ]).

Notes

Each disk pool name must be unique. You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for the user label. User labels can have a maximum of 30 characters.

Minimum firmware level

7.83