The set snmpCommunity command creates a new name for an existing Simple Network Management Protocol (SNMP) community.
This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.
To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin role.
set snmpCommunity communityName="snmpCommunityName" newCommunityName="newSnmpCommunityName"
| Parameter | Description |
|---|---|
| communityName | The name of the existing SNMP community that you want to rename. Enclose the SNMP community name in double quotation marks (" "). |
| newCommunityName | The new name that you want to give to the SNMP community. Enclose the SNMP community name in double quotation marks (" "). |
8.30