Show AutoSupport configuration (for E2800 or E5700 storage arrays)

The show storageArray autoSupport command displays the AutoSupport bundle collection settings for the storage array.

Supported Arrays

This command is operational for either the E2800, E5700, or EF600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin or Storage Monitor role.

Context

The command output from this command shows the following configuration information:

The activation status for this management domain of the AutoSupport feature, the AutoSupport OnDemand feature, and the AutoSupport Remote Diagnostics feature
Delivery parameters that depend on the configured delivery method:
- Delivery method is Email (SMTP): Destination email address, mail relay server, and sender email address are shown
- Delivery method is HTTP or HTTPs:
  - Direct connection - destination IP address is shown
  - Proxy server connection - Host address, port number, and authentication details are shown
  - Automatic proxy configuration script (PAC) connection - script location is shown
Autosupport daily and weekly preferred time ranges
Information about ASUP capabilities, the chassis serial number, and the configured daily and weekly schedules

Syntax

show storageArray autoSupport

Parameters

None.

Minimum Firmware Level

8.40

Examples

   SMcli -n Array1 -c "show storageArray autoSupport;"

   The AutoSupport feature is enabled on this storage array.
   The AutoSupport OnDemand feature is enabled on this storage array.
   The AutoSupport Remote Diagnostics feature is enabled on this storage array.

   Delivery Method: Email (SMTP)
     Destination email address: http://support.mycompany.com/put/AsupPut/
     Mail relay server: ra.eng.netapp.com
     Sender email address: user@netapp.com
   -or-
   Delivery Method: HTTP
     Destination IP address: http://support.mycompany.com/put/AsupPut/
     Connection: Direct
         -or-
     Connection: Proxy server
      Host Address: 10.227.76.178
       Port number: 8080
       Authentication required: Yes
        User name: admin
        Password: ********
         -or-
     Connection: Automatic proxy configuration script (PAC)
      Script location: http://esgweb.eng.mycompany.com/proxy.pac

   The AutoSupport daily schedule preferred time range is from 12:00 AM to 01:00 AM.
   The AutoSupport weekly schedule preferred time range is from 10:00 PM to 11:00 PM on Thursday, Saturday.

   AutoSupport Capable  AutoSupport OnDemand Capable  Chassis Serial Number  Daily Schedule  Weekly Schedule
   Yes (enabled)        Yes                           SX94500434             12:55 AM        10:08 PM on Thursdays

   SMcli completed successfully.

Minimum firmware level

8.40