Show drive channel statistics

The show driveChannel stats command shows the cumulative data transfer for the drive channel and error information.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Context

If the controller has automatically degraded a drive channel, this command also shows interval statistics. When you use this command, you can show information about one specific drive channel, several drive channels, or all drive channels.

Syntax

show (driveChannel [(1 | 2 | 3 | 4 | 5 | 6 | 7 | 8)] | 
   driveChannels [1 2 3 4 5 6 7 8] | 
   allDriveChannels) stats

Parameters

Parameter Description
driveChannel

The identifier number of the drive channel for which you want to show information. Valid drive channel values are 1, 2, 3, 4, 5, 6, 7, or 8. Enclose the drive channel in square brackets ([ ]).

Use this parameter when you want to show the statistics for only one drive channel.

driveChannels

The identifier numbers of several drive channels for which you want to show information. Valid drive channel values are 1, 2, 3, 4, 5, 6, 7, or 8. Enclose the drive channels in square brackets ([ ]) with the drive channel value separated with a space.

Use this parameter when you want to show the statistics for more than one drive channel.

allDriveChannels The identifier that selects all of the drive channels.

Notes

None.

Minimum firmware level

6.10

7.15 adds an update to the drive channel identifier.