Reset storage array host port statistics baseline

The reset storageArray hostPortStatisticsBaseline command resets the storage array host port statistics baseline.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Storage Monitor role.

Context

Important: This command replaces the deprecated Reset storage array Infiniband statistics baseline, Reset storage array iSCSI baseline, and Reset storage array iSER baseline commands.

Syntax

reset storageArray hostPortStatisticsBaseline type=(ISCSI| ISER | SRP | NVMEOF)

Parameters

Parameter Description
type Allows you to indicate which statistics type to collect. Valid choices are:ISCSI, ISER, SRP, and NVMEOF.

Minimum firmware level

8.41

Parent topic: Controller host port configuration commands
Related reference
Copyright © 1994-2020, NetApp, Inc. All rights reserved.
Part number: 215-13131_2020-10_en-us
October 2020