Start synchronous mirroring synchronization

The start syncMirror primary synchronize command starts synchronous mirroring synchronization.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, and E5700 arrays, as long as all SMcli packages are installed.


To execute this command on an E2800 or E5700 storage array, you must have the Storage Admin role.


Note: In previous versions of this command the feature identifier was remoteMirror. This feature identifier is no longer valid and is replaced by syncMirror.


start syncMirror primary ["volumeName"] synchronize


Parameter Description
primary The name of the primary volume for which you want to start synchronization. Enclose the primary volume name in double quotation marks (" ") inside of square brackets ([ ]).

Minimum firmware level