Enable or disable AutoSupport maintenance window (for individual E2800 or E5700 arrays)

The set storageArray autoSupportMaintenanceWindow command turns on or turns off the AutoSupport maintenance window feature.

Use a maintenance window to suppress automatic ticket creation on error events. Under normal operation mode the storage array will use AutoSupport to open a case with Technical Support if there is an issue. When AutoSupport is placed in a maintenance window this feature is suppressed.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin role.

Syntax

set storageArray autoSupportMaintenanceWindow (enable | disable) 
    emailAddresses=("emailAddress1" "emailAddress2" ...) 
    [duration=<duration_in_hours>];

Parameters

Parameter Description
emailAddresses The list of email addresses to receive a confirmation email that the maintenance window request has been processed. You can specify up to five email addresses.
duration Optional. The duration (in hours) to enable maintenance window. If omitted, the maximum supported duration (72 hours) is used.

Examples

SMcli -n Array1 -c "set storageArray autoSupportMaintenanceWindow enable 
      emailAddresses=\"me@company.com\" duration=5;"
 
SMcli completed successfully.
SMcli -n Array1 -c "set storageArray autoSupportMaintenanceWindow enable 
      emailAddresses=(\"me1@company.com\" \"me2@company.com\");"

SMcli completed successfully.
SMcli -n Array1 -c "set storageArray autoSupportMaintenanceWindow disable 
      emailAddresses=(\"me1@company.com\" \"me2@company.com\" \"me3@company.com\" 
      \"me4@company.com\" \"me5@company.com\");"

SMcli completed successfully.

Minimum Firmware Level

8.42