Update storage array syslog configuration

The set storageArray syslog command allows you to change the syslog server address, protocol, or port number.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.

Syntax

set storageArray syslog id="<id>" 
serverAddress="<address>" 
port=<port> protocol=("udp" | "tcp" | "tls") 
components=(componentName=("auditLog") ...)

Parameters

Parameter Description
serverAddress Syslog receiver hostname or IP address.
port Syslog receiver port number.
protocol Syslog transmission protocol. Acceptable values include UDP, TCP, or TLS.
components List of component entries that will be logged to the syslog server. Currently, only audit logs are supported.
componentName Component name; currently only "auditLog" is supported.

Minimum firmware level

8.42

Example

SMcli -n Array1 -c "set storageArray syslog
id=\"331998fe-3154-4489-b773-b0bb60c6b48e\"
serverAddress=\"192.168.2.1\" port=514 protocol=\"udp\"
components=(componentName=\"auditLog\");" 
ID: 331998fe-3154-4489-b773-b0bb60c6b48e Server Address: 192.168.2.1
Port: 514 Protocol: udp 
Components 
1. Component Name: auditLog
SMcli completed successfully.